Remote Control Commands
R&S®EX-IQ-BOX
285
User Manual 1409.5570.32 ─ 05
Example: 
EBOX:USER:SSI:SIZE 12
sets the word size resolution to 12 bit.
Manual operation: See "Word Size" on page 124
[:SOURce<hw>]:EBOX:USER:SSI:SPI:CLOCk:FREQuency <Frequency>
Selects the system clock frequency.
Parameters:
<Frequency>
1MHZ | 2.5MHZ | 5MHZ | 8.333MHZ | 12.5MHZ | 25MHZ
*RST: 
1MHZ
Example: 
EBOX:USER:SSI:SPI:CLOC:FREQ 12.5MHz
Manual operation: See "Clock Frequency" on page 125
[:SOURce<hw>]:EBOX:USER:SSI:SPI:CLOCk:PHASe <Phase>
Selects the phase of the clock signal. Either 0 or 180 degree are possible.
Parameters:
<Phase>
0 | 180
*RST: 
0
Example: 
EBOX:USER:SSI:SPI:CLOC:PHAS 180
shifts the phase of the clock signal by 180 degree.
Manual operation: See "Clock Phase" on page 125
[:SOURce<hw>]:EBOX:USER:SSI:SPI:CSELect <CSelect>
Selects the SSI-SPI chip.
Parameters:
<CSelect>
0 | 1 | OFF | ON
*RST: 
0
Example: 
EBOX:USER:SSI:SPI:CSEL ON
Manual operation: See "Chip Select" on page 126
[:SOURce<hw>]:EBOX:USER:SSI:SPI:FSELect <FSelect>
Selects a SSI:SPI file.
Parameters:
<FSelect>
string
Example: 
EBOX:USER:SSI:SPI:FSEL "spidata"
Manual operation: See "Select File" on page 126
User Defined - Remote Control Commands
Batch convert pdf to html - Convert PDF to html files in C#.net, ASP.NET MVC, WinForms, WPF application
How to Convert PDF to HTML Webpage with C# PDF Conversion SDK
convert pdf into html email; batch convert pdf to html
Batch convert pdf to html - VB.NET PDF Convert to HTML SDK: Convert PDF to html files in vb.net, ASP.NET MVC, WinForms, WPF application
PDF to HTML Webpage Converter SDK for VB.NET PDF to HTML Conversion
convert pdf to web page online; convert from pdf to html
Remote Control Commands
R&S®EX-IQ-BOX
286
User Manual 1409.5570.32 ─ 05
[:SOURce<hw>]:EBOX:USER:SSI:SPI:RBYTe?
Queries the SSI:SPI byte.
Return values: 
<RByte>
integer
Example: 
EBOX:USER:SSI:SPI:RBYT?
Usage: 
Query only
Manual operation: See "Read Byte (hex)" on page 126
[:SOURce<hw>]:EBOX:USER:SSI:SPI:WBYTe <WByte>
Parameters:
<WByte>
integer
Manual operation: See "Write Byte (hex)" on page 126
9.4 CPRI Remote Control Commands
This chapter describes all remote-control commands for the standardized protocol CPRI,
including their parameters and value ranges. The parameters are set in the configuration
software R&S DigIConf.
In remote control operation, R&S DigIConf itself is operated remotely by means of
remote-control commands. For background information about the SCPI command struc-
ture and basic information on operating R&S DigIConf via remote control, refer to ​chap-
ter 8, "Remote Control Basics", on page 213.
Beside the main controls like activating, CPRI test mode and save/recall settings, the
interface is controlled by various parameters, grouped by the following functions:
● Multiwaveform Playback (ARB) settings
Control & Managment settings
Hardware information
L1 analysis information
● Main settings
Recorder settings
Diagnostics
● Downlink/Uplink settings (Tx/Rx)
● Vendor Data
Find a list of all commands for the R&S EX-IQ-BOX at the end of the manual.
CPRI Remote Control Commands
VB.NET PDF Convert to Jpeg SDK: Convert PDF to JPEG images in vb.
C# HTML Document Viewer for Sharepoint, C# HTML Document Viewer for Azure, C# HTML Document Viewer NET components to batch convert adobe PDF files to
convert pdf to html5; convert pdf to html code c#
C# PDF Convert to Jpeg SDK: Convert PDF to JPEG images in C#.net
NET. .NET library to batch convert PDF files to jpg image files. High quality jpeg file can be exported from PDF in .NET framework.
convert pdf into html; convert pdf into webpage
Remote Control Commands
R&S®EX-IQ-BOX
287
User Manual 1409.5570.32 ─ 05
The following description lists the remote-control commands in alphabetical order, struc-
tured by function.
9.4.1 CPRI ARB Subsystem
The ARB subsystem contains all remote control commands that are relevant for loading
a waveform file in the waveform memory of the R&S EX-IQ-BOX.To get a list of available
waveform files, see ​[:​SOURce<hw>]:​EBOX:​ARB:​CATalog?​ on page 249.
The numeric suffix to ARB<ch> distinguishes the channel of the waveform memory
(ARB1...4).
[:​SOURce<hw>]:​EBOX:​CPRI:​ARB:​OPTion?​
.....................................................................287
[:​SOURce<hw>]:​EBOX:​CPRI:​ARB:​PEAK?​
.......................................................................287
[:​SOURce<hw>]:​EBOX:​CPRI:​ARB:​PRESet​
......................................................................288
[:​SOURce<hw>]:​EBOX:​CPRI:​ARB:​RELoad​
......................................................................288
[:​SOURce<hw>]:​EBOX:​CPRI:​ARB:​RMS?​
.........................................................................288
[:​SOURce<hw>]:​EBOX:​CPRI:​ARB:​SAMPles:​TOTal?​
.........................................................288
[:​SOURce<hw>]:​EBOX:​CPRI:​ARB<ch>:​CONFlict?​
............................................................289
[:​SOURce<hw>]:​EBOX:​CPRI:​ARB<ch>:​FILE​
....................................................................289
[:​SOURce<hw>]:​EBOX:​CPRI:​ARB<ch>:​SAMPles?​
............................................................289
[:​SOURce<hw>]:​EBOX:​CPRI:​ARB<ch>:​SRATe?​
..............................................................290
[:​SOURce<hw>]:​EBOX:​CPRI:​ARB<ch>:​STATe​
.................................................................290
[:SOURce<hw>]:EBOX:CPRI:ARB:OPTion?
Queries the options installed on the R&S EX-IQ-BOX. The query returns a list of options
in a comma-separated string.
Return values: 
<opt>
string
Example: 
EBOX:CPRI:ARB:OPT?
check the installed options.
Response: EXBOX-B85, EXBOX-K10, EXBOX-K11,
EXBOX-K90, EXBOX-K242, ...
Usage: 
Query only
[:SOURce<hw>]:EBOX:CPRI:ARB:PEAK?
Queries the signal level in terms of a peak envelope power value (PEP). The unit of the
peak envelope power is dBFS (Full Scale ratio).
Return values: 
<peak>
float
Example: 
EBOX:CPRI:ARB:PEAK?
queries the peak envelope power of the signal.
Usage: 
Query only
Manual operation: See "PEP dBFS" on page 207
CPRI Remote Control Commands
VB.NET PDF Convert to Tiff SDK: Convert PDF to tiff images in vb.
NET control to batch convert PDF documents to Tiff format in Visual Basic. Qualified Tiff files are exported with high resolution in VB.NET.
pdf to html; best website to convert pdf to word online
C# PDF Convert to Tiff SDK: Convert PDF to tiff images in C#.net
Studio .NET project. Powerful .NET control to batch convert PDF documents to tiff format in Visual C# .NET program. Free library are
converting pdf to html code; convert pdf to html online for
Remote Control Commands
R&S®EX-IQ-BOX
288
User Manual 1409.5570.32 ─ 05
[:SOURce<hw>]:EBOX:CPRI:ARB:PRESet
The command sets the wavefom memory to default, i.e. it erases the ARB table (all loaded
waveform files and settings).
Example: 
SOUR1:EBOX:CPRI:ARB:PRES
clears the ARB table.
Usage: 
Event
Manual operation: See "Reset" on page 207
[:SOURce<hw>]:EBOX:CPRI:ARB:RELoad
Refreshes all currently loaded waveform files.
Example: 
SOUR1:EBOX:CPRI:ARB:REL
update assigned files in the waveform memory.
Usage: 
Event
Manual operation: See "Reload" on page 207
[:SOURce<hw>]:EBOX:CPRI:ARB:RMS?
Queries the signal level in terms of an rms value. The unit of the power is dBFS (Full
Scale ratio).
Return values: 
<rms>
float
Example: 
EBOX:CPRI:ARB:RMS?
queries the rms value of the signal.
Usage: 
Query only
Manual operation: See "Level dBFS" on page 207
[:SOURce<hw>]:EBOX:CPRI:ARB:SAMPles:TOTal?
Queries the number of samples including all active waveform files.
Return values: 
<Total>
float
Increment: 1.0e-6
*RST: 
0
Example: 
SOUR1:EBOX:CPRI:ARB:SAMP:TOT?
check the entire number of samples.
Response: 0.154 MSamples
Usage: 
Query only
Manual operation: See "Samples" on page 206
CPRI Remote Control Commands
C# Create PDF from images Library to convert Jpeg, png images to
Batch convert PDF documents from multiple image formats, including Jpg, Png, Bmp, Gif, Tiff, Bitmap, .NET Graphics, and REImage.
pdf to html; best pdf to html converter online
C# PDF Convert to Images SDK: Convert PDF to png, gif images in C#
ASP.NET application. An advanced .NET control able to batch convert PDF documents to image formats in C#.NET. Support exporting PDF
converter pdf to html; export pdf to html
Remote Control Commands
R&S®EX-IQ-BOX
289
User Manual 1409.5570.32 ─ 05
[:SOURce<hw>]:EBOX:CPRI:ARB<ch>:CONFlict?
The command queries whether an option conflict has occurred. A conflict arises, if a
waveform requires an option, that is not installed on the R&S EX-IQ-BOX, or is not
enabled.
Return values: 
<Oconflict>
OFF | ON
*RST: 
OFF
Example: 
SOUR1:EBOX:CPRI:ARB:CONF?
check if there is an option conflict.
Response: 0 if OK, 1 if not OK
Usage: 
Query only
Manual operation: See "Options Conflict" on page 207
[:SOURce<hw>]:EBOX:CPRI:ARB<ch>:FILE <File>
The command selects a stored waveform file. Enter directory and file name with the file
extension *.wv for waveform files.
Parameters:
<File>
<path>, <file_name>.<ext>
String parameter containing the directory, where the waveform file
is located, the file name, and the file extension *.wv for waveform
files.
Example: 
SOUR1:EBOX:CPRI:ARB2:FILE
"..\\DigIConf\Waveforms\p4DQPSK7.wv"
load the file "waveform" into the second ARB waveform memory.
Manual operation: See "File" on page 205
[:SOURce<hw>]:EBOX:CPRI:ARB<ch>:SAMPles?
The command queries the number of samples the loaded signal is composed of.
Return values: 
<Samples>
integer
Increment: 1
*RST: 
0
Example: 
SOUR1:EBOX:CPRI:ARB1:SAMPl?
query the samples of the signal loaded in ARB1 waveform mem-
ory.
Response: 122.88
the current sample rate is 122.88 Mbit/s
Usage: 
Query only
CPRI Remote Control Commands
C# Create PDF from OpenOffice to convert odt, odp files to PDF in
SharePoint. A professional .NET PDF control able to batch convert multiple OpenOffice documents to PDF files in C#.NET. Convert OpenOffice
convert pdf into web page; pdf to html conversion
VB.NET PDF Convert to Images SDK: Convert PDF to png, gif images
service, DNN (DotNetNuke), SharePoint. VB.NET components for batch convert high resolution images from PDF. Convert PDF documents to
convert pdf to website; convert pdf to html email
Remote Control Commands
R&S®EX-IQ-BOX
290
User Manual 1409.5570.32 ─ 05
[:SOURce<hw>]:EBOX:CPRI:ARB<ch>:SRATe?
The command queries the sample rate of the signal, loaded from the waveform memory.
The sample rate represents the number of samples per second that are used for digitizing.
Return values: 
<Srate>
integer
Increment: 1
*RST: 
0
Example: 
SOUR1:EBOX:CPRI:ARB1:SRAT?
query the sample rate of the signal loaded in ARB1 wavefiorm
memory.
Response: 122.88
the current sample rate is 122.88 Mbit/s
Usage: 
Query only
Manual operation: See "Sample Rate /MHz" on page 206
[:SOURce<hw>]:EBOX:CPRI:ARB<ch>:STATe <State>
The command switches on the transmission of the test data.
Parameters:
<State>
ON | OFF
*RST: 
OFF
Example: 
SOUR1:EBOX:CPRI:ARB1:STAT ON
activate waveform loaded in ARB1.
Manual operation: See "State" on page 207
9.4.2 CPRI Control & Management Subsystem
The CPRI Control & Management (C&M) command subsystem comprises all remote-
control commands related to the process of exchanging control information between RE
(Radio Equipment) and REC (Radio Equipment Control) in base station systems. CPRI
supports two different protocols for C&M data, the slower variation HDLC (High-Level
Data Link Control) and the fast Ethernet.
[:​SOURce<hw>]:​EBOX:​CPRI:​CM:​ETH:​ACTive?​
................................................................291
[:​SOURce<hw>]:​EBOX:​CPRI:​CM:​HDLC:​BAUDrate​
...........................................................291
[:​SOURce<hw>]:​EBOX:​CPRI:​CM:​ETH:​BRATe?​
................................................................291
[:​SOURce<hw>]:​EBOX:​CPRI:​CM:​ETH:​COMMand​
............................................................292
[:​SOURce<hw>]:​EBOX:​CPRI:​CM:​ETH:​EXECute​
...............................................................292
[:​SOURce<hw>]:​EBOX:​CPRI:​CM:​ETH:​PPTR​
...................................................................292
[:​SOURce<hw>]:​EBOX:​CPRI:​CM:​ETH:​PTR?​
....................................................................293
[:​SOURce<hw>]:​EBOX:​CPRI:​CM:​ETH:​STATe​
..................................................................293
[:​SOURce<hw>]:​EBOX:​CPRI:​CM:​HDLC:​ACTive?​
.............................................................293
[:​SOURce<hw>]:​EBOX:​CPRI:​CM:​HDLC:​BRATe​
...............................................................294
[:​SOURce<hw>]:​EBOX:​CPRI:​CM:​HDLC:​COMMand​
..........................................................294
CPRI Remote Control Commands
VB.NET Create PDF from images Library to convert Jpeg, png images
Able to create PDF from images in both .NET WinForms and ASP.NET application. Components to batch convert PDF documents in Visual Basic .NET class.
best website to convert pdf to word; pdf to html converter online
VB.NET PDF - Convert CSV to PDF
HTML Document Viewer for Azure, C# HTML Document Viewer Free VB.NET RTF to PDF converter SDK for advanced .NET library which able to batch convert multiple RTF
convert pdf into webpage; convert pdf to html online
Remote Control Commands
R&S®EX-IQ-BOX
291
User Manual 1409.5570.32 ─ 05
[:​SOURce<hw>]:​EBOX:​CPRI:​CM:​HDLC:​EXECute​
............................................................295
[:​SOURce<hw>]:​EBOX:​CPRI:​CM:​HDLC:​MODE​
................................................................295
[:​SOURce<hw>]:​EBOX:​CPRI:​CM:​HDLC:​RFRames?​
.........................................................295
[:​SOURce<hw>]:​EBOX:​CPRI:​CM:​HDLC:​RST​
...................................................................296
[:​SOURce<hw>]:​EBOX:​CPRI:​CM:​HDLC:​RX?​
...................................................................296
[:​SOURce<hw>]:​EBOX:​CPRI:​CM:​HDLC:​SFRames?​
..........................................................296
[:​SOURce<hw>]:​EBOX:​CPRI:​CM:​HDLC:​SOURce​
.............................................................296
[:​SOURce<hw>]:​EBOX:​CPRI:​CM:​HDLC:​STATe​
................................................................297
[:SOURce<hw>]:EBOX:CPRI:CM:ETH:ACTive?
The command queries whether the interface is active.
Return values: 
<Active>
OFF | ON
*RST: 
OFF
Example: 
SOUR1:EBOX:CPRI:CM:ETH:ACT?
check the activity of the Ethernet interface.
Response: 0
the interface is not active.
Usage: 
Query only
Manual operation: See "Ethernet Active" on page 199
[:SOURce<hw>]:EBOX:CPRI:CM:HDLC:BAUDrate <Baudrate>
Determines the number of bits to be transferred per second via the serial interface RS232.
Avvailable baudrates are: 300 | 600 | 1200 | 2400 | 4800 | 9600 | 14400 | 19200 | 28800
| 38400 | 56000 | 57600 | 115200 | 128000 | 256000 bps.
Parameters:
<Baudrate>
float
Example: 
EBOX:CPRI:CM:HDLC:BAUD 2400
sets 2400 bits per second transmissioni rate.
Manual operation: See "RS232 Settings" on page 197
[:SOURce<hw>]:EBOX:CPRI:CM:ETH:BRATe?
The command queries the resulting bit rate of fast C&M data exchange. This bit rate
depends on the CPRI line bit rate and the Ethernet pointer.
Return values: 
<Rate>
float
Increment: 0.01
*RST: 
42240000
CPRI Remote Control Commands
Remote Control Commands
R&S®EX-IQ-BOX
292
User Manual 1409.5570.32 ─ 05
Example: 
SOUR1:EBOX:CPRI:CM:ETH:BRAT?
query the current bit rate of fast C&M.
Response: 122.88
the current bit rate is 122.88 Mbit/s.
Usage: 
Query only
Manual operation: See "Bit Rate" on page 199
[:SOURce<hw>]:EBOX:CPRI:CM:ETH:COMMand <Command>
This command enters a control command in fast C&M interactive mode.
Parameters:
<Command>
string
Example: 
SOUR1:EBOX:CPRI:CM:ETH:COMM "test cmd"
transmit the test command for fast C&M control to the control
panel.
SOUR1:EBOX:CPRI:CM:ETH:EXEC
execute the test command.
Manual operation: See "Input Window, Command line, Execute" on page 200
[:SOURce<hw>]:EBOX:CPRI:CM:ETH:EXECute
The command sends the C&M data in fast C&M mode.
Example: 
SOUR1:EBOX:CPRI:CM:ETH:EXEC
executes the control command, or command sequence of fast
C&M data.
Usage: 
Event
Manual operation: See "Input Window, Command line, Execute" on page 200
[:SOURce<hw>]:EBOX:CPRI:CM:ETH:PPTR <Ptr>
This command sets the CPRI Ethernet pointer. This setting determines the Fast C&M bit
rate, since this pointer represents the boundary between vendor data and Fast C&M Data
in the CPRI control block.
Parameters:
<Ptr>
20...63
Range: 
20  to  63
Increment: 1
*RST: 
20
Example: 
SOUR1:EBOX:CPRI:CM:ETH:PPTR 25
set the ethernet pointer to 25.
Manual operation: See "Pref. Eth. Pointer" on page 198
CPRI Remote Control Commands
Remote Control Commands
R&S®EX-IQ-BOX
293
User Manual 1409.5570.32 ─ 05
[:SOURce<hw>]:EBOX:CPRI:CM:ETH:PTR?
The command queries the resulting Ethernet pointer after the link setup, i.e. the position
after the handshake between the R&S EXBOX-B85 and the DUT.
Return values: 
<Pptr>
float
Range: 
20  to  63
Increment: 1
*RST: 
20
Example: 
SOUR1:EBOX:CPRI:CM:ETH:PTR?
check the position of the ethernet pointer after link setup.
Response: 45
the resulting pointer is at position 45.
Usage: 
Query only
Manual operation: See "Ethernet Pointer" on page 167
[:SOURce<hw>]:EBOX:CPRI:CM:ETH:STATe <State>
The command activates the C&M data exchange via the Ethernet interface.
Parameters:
<State>
OFF | ON
*RST: 
OFF
Example: 
SOUR1:EBOX:CPRI:CM:ETH:STAT ON
switches on fast C&M.
Manual operation: See "State" on page 198
[:SOURce<hw>]:EBOX:CPRI:CM:HDLC:ACTive?
The command queries whether the interface is active.
Return values: 
<Active>
OFF | ON
*RST: 
OFF
Example: 
SOUR1:EBOX:CPRI:CM:HDLC:ACT?
checks the activity of the HDLC interface.
Response: 0
the interface is not active.
Usage: 
Query only
Manual operation: See "HDLC Active" on page 196
CPRI Remote Control Commands
Remote Control Commands
R&S®EX-IQ-BOX
294
User Manual 1409.5570.32 ─ 05
[:SOURce<hw>]:EBOX:CPRI:CM:HDLC:BRATe <Rate>
The command sets the bit rate for transmission of the control data in slow C&M mode
(HDLC).
Note: The maximum HDLC rate for slow C&M depends on the CPRI Line Bit Rate. The
following table shows the available HDLC bit rates for the corresponding CPRI bit rates.
CPRI Line Bit Rate
2x (1228.8 Mbit/s)
4x(2457.6 Mbit/s)
5x (3072.0 Mbit/s)
Possible HDLC Bit Rates
in kbit/s
240
480
960
240
480
960
1920
240
480
960
1920
2400
Parameters:
<Rate>
240 | 480 | 960 | 1920 | 2400
Range: 
240000  to  2400000
Increment: 1
*RST: 
240000
Default unit: kbit/s
Example: 
SOUR1:EBOX:CPRI:CM:HDLC:BRAT 480
select a bit rate of 480 kbit/s for slow C&M transmission.
Manual operation: See "Bit Rate" on page 195
[:SOURce<hw>]:EBOX:CPRI:CM:HDLC:COMMand <Command>
Enters a control command in slow C&M interactive mode.
Note that the command may perform a number of symbols that is divisible by 2. Odd
values ​​are not accepted.
This command applies to HDLC C&M data source "Terminal", see ​[:​SOURce<hw>]:​
EBOX:​CPRI:​CM:​HDLC:​SOURce​. In direct mode, that is control data received via the
RS-232-C interface, this command is not effective (CPRI REC Test mode).
Parameters:
<Command>
string
Example: 
SOUR1:EBOX:CPRI:CM:HDLC:COMM "test cmd"
transmits the test command for slow C&M control to the control
panel.
SOUR1:EBOX:CPRI:CM:HDLC:EXEC
executes the test command.
Manual operation: See "Terminal" on page 197
CPRI Remote Control Commands
Documents you may be interested
Documents you may be interested