Remote Control Commands
R&S®EX-IQ-BOX
295
User Manual 1409.5570.32 ─ 05
[:SOURce<hw>]:EBOX:CPRI:CM:HDLC:EXECute
The command sends the entered slow C&M data.
This command applies to slow C&M source "Terminal". In direct mode, i.e. with data
coming via the RS-232 interface, the controls are not active (CPRI REC Test mode).
Example: 
SOUR1:EBOX:CPRI:CM:HDLC:EXEC
executes the control command of slow C&M data.
Usage: 
Event
Manual operation: See "Terminal" on page 197
[:SOURce<hw>]:EBOX:CPRI:CM:HDLC:MODE <Mode>
The command selects the mode for HDLC C&M data transmission.
Parameters:
<Mode>
DIRect | ECODing
DIRect
The R&S EX-IQ-BOX transmits the data directly to the DUT, i.e.
without internal encoding or decoding.
This mode applies to HDLC source "RS-232-C Connector".
ECODing
The R&S EX-IQ-BOX either encodes the plain text data before
transmission to the DUT, or it decodes and then displays the
incoming data.
This mode applies to HDLC source "Terminal".
*RST: 
ECODing
Example: 
SOUR1:EBOX:CPRI:CM:HDLC:MODE DIR
send the data without internal encodin/decoding.
Manual operation: See "Mode" on page 195
[:SOURce<hw>]:EBOX:CPRI:CM:HDLC:RFRames?
The command queries the number of received HDLC frames.
Return values: 
<Rframes>
float
Increment: 1
*RST: 
0
Example: 
SOUR1:EBOX:CPRI:CM:HDLC:RFR?
query the number of received HDLC frames.
Usage: 
Query only
Manual operation: See "Frames Received" on page 197
CPRI Remote Control Commands
Convert pdf to html code for email - Convert PDF to html files in C#.net, ASP.NET MVC, WinForms, WPF application
How to Convert PDF to HTML Webpage with C# PDF Conversion SDK
convert pdf to url online; convert pdf to html code for email
Convert pdf to html code for email - VB.NET PDF Convert to HTML SDK: Convert PDF to html files in vb.net, ASP.NET MVC, WinForms, WPF application
PDF to HTML Webpage Converter SDK for VB.NET PDF to HTML Conversion
add pdf to website html; convert pdf into html code
Remote Control Commands
R&S®EX-IQ-BOX
296
User Manual 1409.5570.32 ─ 05
[:SOURce<hw>]:EBOX:CPRI:CM:HDLC:RST
Resets the Rx/Tx data.
Example: 
EBOX:CPRI:CM:HDLC:RST
Usage: 
Event
Manual operation: See "Terminal" on page 197
[:SOURce<hw>]:EBOX:CPRI:CM:HDLC:RX?
Queries the received control & management data (HDLC).
Return values: 
<Rx>
string
Example: 
EBOX:CPRI:CM:HDLC:RX?
Usage: 
Query only
Manual operation: See "Terminal" on page 197
[:SOURce<hw>]:EBOX:CPRI:CM:HDLC:SFRames?
The command queries the number of sent HDLC frames.
Return values: 
<Sframes>
float
Increment: 1
*RST: 
0
Example: 
SOUR1:EBOX:CPRI:CM:HDLC:SFR?
query the number of sent HDLC frames.
Usage: 
Query only
Manual operation: See "Frames Sent" on page 196
[:SOURce<hw>]:EBOX:CPRI:CM:HDLC:SOURce <Source>
The command selects the source of the HDLC C&M data.
CPRI Remote Control Commands
VB.NET PDF Convert to Word SDK: Convert PDF to Word library in vb.
VB.NET class source code for .NET framework. This VB.NET PDF to Word converter control is a and mature .NET solution which aims to convert PDF document to Word
convert pdf to html code c#; online pdf to html converter
C# PDF Convert to Word SDK: Convert PDF to Word library in C#.net
Convert PDF to multiple MS Word formats such as .doc and Password protected PDF file can be printed to Word C# source code is available for copying and using
converting pdfs to html; converting pdf to html code
Remote Control Commands
R&S®EX-IQ-BOX
297
User Manual 1409.5570.32 ─ 05
Parameters:
<Source>
TERMinal
TERMinal|RS232
Use the integrated terminal of R&S DigIConf for C&M data input
or output.
This method applies to the CPRI RE test mode.
RS232
Use the RS-232-C connector for C&M data input or output.
You can use the RS-232-C interface in the CPRI RE and the CPRI
REC test mode.
*RST: 
TERMinal
Example: 
SOUR1:EBOX:CPRI:CM:HDLC:SOUR TERM
Enter the C&M data via the the terminal of R&S DigIConf.
Manual operation: See "Source" on page 195
[:SOURce<hw>]:EBOX:CPRI:CM:HDLC:STATe <State>
The command activates and deactivates the C&M data exchange by means of HDLC
protocol (slow C&M).
Parameters:
<State>
OFF | ON
*RST: 
OFF
Example: 
SOUR1:EBOX:CPRI:CM:HDLC:STAT ON
switch on slow C&M.
Manual operation: See "State" on page 195
9.4.3 CPRI Hardware Subsystem
The hardware (HW:) command subsystem encloses remote-control commands for setting
hardware parameters, including the assignment to the interfaces, special settings of the
link, status information and reference clock settings.
The numeric suffix to GPIO<dir> distinguishes the transmission direction of the con-
nected GPIO Interfaces.
[:​SOURce<hw>]:​EBOX:​CPRI:​HW:​ALARm?​
......................................................................298
[:​SOURce<hw>]:​EBOX:​CPRI:​HW:​BBRevision?​
.................................................................298
[:​SOURce<hw>]:​EBOX:​CPRI:​HW:​CMODe?​
......................................................................299
[:​SOURce<hw>]:​EBOX:​CPRI:​HW:​CORE?​
........................................................................299
[:​SOURce<hw>]:​EBOX:​CPRI:​HW:​EBRevision?​
.................................................................300
[:​SOURce<hw>]:​EBOX:​CPRI:​HW:​FBVersion?​
..................................................................300
[:​SOURce<hw>]:​EBOX:​CPRI:​HW:​FCVersion?​
..................................................................300
[:​SOURce<hw>]:​EBOX:​CPRI:​HW:​GPIO:​MFWidth:​BFRame​
...............................................300
[:​SOURce<hw>]:​EBOX:​CPRI:​HW:​GPIO:​MFWidth:​HFRame​
...............................................301
[:​SOURce<hw>]:​EBOX:​CPRI:​HW:​GPIO:​MFWidth:​NFRame​
...............................................301
[:​SOURce<hw>]:​EBOX:​CPRI:​HW:​GPIO<ch>:​DIRection​
.....................................................301
CPRI Remote Control Commands
C# Create PDF from Word Library to convert docx, doc to PDF in C#.
Free online Word to PDF converter without email. C#.NET Sample Code: Convert Word to PDF in C#.NET Project. Add necessary references:
batch convert pdf to html; how to convert pdf into html code
VB.NET Create PDF from PowerPoint Library to convert pptx, ppt to
NET, VB.NET convert PDF to HTML, VB.NET Convert multiple pages PowerPoint to fillable and editable PDF Create PDF file from PowerPoint free online without email.
embed pdf into html; embed pdf into webpage
Remote Control Commands
R&S®EX-IQ-BOX
298
User Manual 1409.5570.32 ─ 05
[:​SOURce<hw>]:​EBOX:​CPRI:​HW:​GPIO<ch>:​SIGnal​
.........................................................302
[:​SOURce<hw>]:​EBOX:​CPRI:​HW:​HSSS:​INPut​
.................................................................303
[:​SOURce<hw>]:​EBOX:​CPRI:​HW:​HSSS:​OUTPut:​SFP1[:​STATe]​
........................................304
[:​SOURce<hw>]:​EBOX:​CPRI:​HW:​HSSS:​OUTPut:​SFP2[:​STATe]​
........................................304
[:​SOURce<hw>]:​EBOX:​CPRI:​HW:​HSSS:​OUTPut:​SMA[:​STATe]​
.........................................305
[:​SOURce<hw>]:​EBOX:​CPRI:​HW:​LBRate​
........................................................................305
[:​SOURce<hw>]:​EBOX:​CPRI:​HW:​LOF?​
...........................................................................306
[:​SOURce<hw>]:​EBOX:​CPRI:​HW:​LOS?​
...........................................................................306
[:​SOURce<hw>]:​EBOX:​CPRI:​HW:​PROTocol​
....................................................................306
[:​SOURce<hw>]:​EBOX:​CPRI:​HW:​R21T?​
.........................................................................307
[:​SOURce<hw>]:​EBOX:​CPRI:​HW:​RCLock:​CRLocked?​
......................................................307
[:​SOURce<hw>]:​EBOX:​CPRI:​HW:​RCLock:​CSLocked?​
......................................................307
[:​SOURce<hw>]:​EBOX:​CPRI:​HW:​RCLock:​ROLocked?​
......................................................308
[:​SOURce<hw>]:​EBOX:​CPRI:​HW:​RCLock:​SOURce​
..........................................................308
[:​SOURce<hw>]:​EBOX:​CPRI:​HW:​SEED:​RECeived?​
.........................................................309
[:​SOURce<hw>]:​EBOX:​CPRI:​HW:​SEED:​SCRambling​
.......................................................309
[:​SOURce<hw>]:​EBOX:​CPRI:​HW:​SMA:​DOSWing​
.............................................................310
[:​SOURce<hw>]:​EBOX:​CPRI:​HW:​SMA:​RXEGain​
..............................................................310
[:​SOURce<hw>]:​EBOX:​CPRI:​HW:​T14T​
............................................................................311
[:​SOURce<hw>]:​EBOX:​CPRI:​HW:​TIMing?​
.......................................................................311
[:​SOURce<hw>]:​EBOX:​CPRI:​HW:​TOFFset​
......................................................................311
[:SOURce<hw>]:EBOX:CPRI:HW:ALARm?
This command queries, if any alarm is detected on the CPRI communication link, i.e. it
acts on behalf of all warnings.
Return values: 
<Alarm>
0 | 1
*RST: 
0
Example: 
SOUR1:EBOX:CPRI:HW:ALAR?
check if any link alarm is detected.
Response: 0
no error occured.
Usage: 
Query only
Manual operation: See "Link Status" on page 152
[:SOURce<hw>]:EBOX:CPRI:HW:BBRevision?
This command queries the revision number of the connected CPRI breakout board.
Return values: 
<Bbrevision>
string
Example: 
SOUR1:EBOX:CPRI:HW:BBR?
query the revision number of the connected breakout board.
Response: 4
the internal CPRI breakout board has revision 4.
Usage: 
Query only
CPRI Remote Control Commands
VB.NET Create PDF from Excel Library to convert xlsx, xls to PDF
Jpeg images Viewer, C# HTML Document Viewer for Sharepoint, C# HTML Document Viewer for Azure, C# HTML Document Viewer Convert Excel to PDF document free
convert pdf to html; convert pdf form to web form
VB.NET Create PDF from Word Library to convert docx, doc to PDF in
in VB.NET, VB.NET convert PDF to HTML, VB.NET Convert Word to PDF file with embedded fonts or without original Free online Word to PDF converter without email.
convert pdf into html; convert pdf to web page
Remote Control Commands
R&S®EX-IQ-BOX
299
User Manual 1409.5570.32 ─ 05
Manual operation: See "Breakout Board Revision" on page 155
[:SOURce<hw>]:EBOX:CPRI:HW:CMODe?
Queries the role of the R&S EX-IQ-BOX, i.e. either master (CPRI RE test) or slave (CPRI
REC test).
Return values: 
<Cmode>
string
Master
The R&S EX-IQ-BOX is working in CPRI RE Test mode.
Slave
The R&S EX-IQ-BOX is working in CPRI REC Test mode.
Example: 
SOUR1:EBOX:CPRI:HW:CMOD?
query the role of the R&S EX-IQ-BOX in the CPRI communication
link.
Response: Slave
the R&S EX-IQ-BOX operates as slave, i.e. in CPRI REC Test
mode.
Usage: 
Query only
Manual operation: See "CPRI Mode" on page 168
[:SOURce<hw>]:EBOX:CPRI:HW:CORE?
Queries the current state of the CPRI core.
Return values: 
<Cstatus>
string
Link is up
The CPRI core works in normal operating mode.
Reset
It is at the starting point of establishing the link.
L1 Synchronization
Attempt of L1 synchronization.
Setup protocol version
Protocol version setup.
Setup C&M parameter
C&M parameter setup.
Passive mode
Only I/Q data are active, C&M is not used.
Example: 
SOUR1:EBOX:CPRI:HW:CORE?
check the current mode of the CPRI core.
Response: Link is up
the CPRI conmmunication link operates in normal mode.
Usage: 
Query only
CPRI Remote Control Commands
C# Create PDF from PowerPoint Library to convert pptx, ppt to PDF
email. C# source code is provided for .NET WinForms class. Evaluation PDF library and components for .NET framework. C#.NET Demo Code: Convert PowerPoint to PDF
how to change pdf to html; converting pdf to html email
.NET RasterEdge XImage.Barcode Generator Purchase Details
QR Code. Micro QR Code. PDF 417. Online Convert PDF to Html. SUPPORT: Customer Support; Comprehensive Online Demos; SDK Class API Reference; PURCHASE; COMPANY.
best pdf to html converter; convert pdf fillable form to html
Remote Control Commands
R&S®EX-IQ-BOX
300
User Manual 1409.5570.32 ─ 05
Manual operation: See "Core Mode" on page 168
[:SOURce<hw>]:EBOX:CPRI:HW:EBRevision?
Queries the revision number of the R&S EX-IQ-BOX´s internal board.
Return values: 
<Ebrevision>
string
Example: 
SOUR1:EBOX:CPRI:HW:EBR?
query the revision number of the internal EX-IQ-BOX board.
Response: 123
the internal R&S EX-IQ-BOX board has revision 123.
Usage: 
Query only
Manual operation: See "R&S EX-IQ-BOX Board Revision" on page 154
[:SOURce<hw>]:EBOX:CPRI:HW:FBVersion?
Queries the version of the FPGA (Field Programmable Gate Array) basic design.
Return values: 
<Fbversion>
string
Example: 
SOUR1:EBOX:CPRI:HW:FBV?
check the version of the FPGA basic design.
Response: 02.01.123
the CPRI FPGA has revision 02.01.123.
Usage: 
Query only
Manual operation: See "FPGA Base Version" on page 154
[:SOURce<hw>]:EBOX:CPRI:HW:FCVersion?
Queries the version of the FPGA (Field Programmable Gate Array) CPRI design.
Return values: 
<Fcversion>
string
Example: 
SOUR1:EBOX:CPRI:HW:FCV?
query the version of the CPRI FPGA.
Response: CPRI 01.01.001
the CPRI FPGA has revision 01.01.001.
Usage: 
Query only
Manual operation: See "FPGA CPRI Version" on page 154
[:SOURce<hw>]:EBOX:CPRI:HW:GPIO:MFWidth:BFRame <Width>
Sets the frame width of the basic frame marker output signal in clock periods.
CPRI Remote Control Commands
C# Create PDF from Excel Library to convert xlsx, xls to PDF in C#
Free online Excel to PDF converter without email. Quick integrate online C# source code into .NET class. C# Demo Code: Convert Excel to PDF in Visual C# .NET
embed pdf to website; convert pdf to html with
Purchase RasterEdge Product License Online
PDF, Microsoft Word, Excel, PowerPoint, HTML, Open Office NET imaging SDK to view, convert, process, transform from raster images, like jpeg, tiff, scanned pdf.
best website to convert pdf to word online; convert pdf to html online for
Remote Control Commands
R&S®EX-IQ-BOX
301
User Manual 1409.5570.32 ─ 05
Parameters:
<Width>
float
Range: 
 to  65535
Example: 
EBOX:CPRI:HW:GPIO:MFW:BFR 5
increases the basic frame marker output signal to 5 clock periods.
Manual operation: See "Basic ;  Hyper ;  Node B" on page 163
[:SOURce<hw>]:EBOX:CPRI:HW:GPIO:MFWidth:HFRame <Width>
Sets the frame width of the hyper frame marker output signal in clock periods.
Parameters:
<Width>
float
Range: 
 to  65535
Example: 
EBOX:CPRI:HW:GPIO:MFW:BFR 2
increases the basic frame marker output signal to 2 clock periods.
Manual operation: See "Basic ;  Hyper ;  Node B" on page 163
[:SOURce<hw>]:EBOX:CPRI:HW:GPIO:MFWidth:NFRame <Width>
Sets the frame width of the node B frame marker output signal in clock periods.
Parameters:
<Width>
float
Range: 
 to  65535
Example: 
EBOX:CPRI:HW:GPIO:MFW:BFR 10
increases the basic frame marker output signal to 10 clock periods.
Manual operation: See "Basic ;  Hyper ;  Node B" on page 163
[:SOURce<hw>]:EBOX:CPRI:HW:GPIO<ch>:DIRection <Direction>
Determines the transmission direction at the connected GPIO interfaces. You can indi-
vidually activate each of the three interfaces separately.
The numeric suffix to GPIO<ch> distinguishes between the available GPIO interfaces.
CPRI Remote Control Commands
Remote Control Commands
R&S®EX-IQ-BOX
302
User Manual 1409.5570.32 ─ 05
Parameters:
<Direction>
OFF | OUTPut | INPut
Deactivate the GPIO interface.
OFF
Deactivates the GPIO interface.
OUTPut
Selects the respective GPIO interface as output, i.e. send a control
signal to the external device.
INPut
Selects the appropriate GPIO interface as input, which means you
receive a signal from the external device, e.g. for trigger purpose.
*RST: 
OFF
Example: 
SOUR1:EBOX:CPRI:HW:GPIO1:DIR OUTP
outputs the control signal at GPIO port 1.
Manual operation: See "Direction GPIO 1-3" on page 162
[:SOURce<hw>]:EBOX:CPRI:HW:GPIO<ch>:SIGnal <Signal>
The command determines the type of the control signal. You can define separate signals
for each of the three interfaces.
The numeric suffix GPIO<ch> distinguishes between the GPIO interfaces 1, 2, 3 and 4.
CPRI Remote Control Commands
Remote Control Commands
R&S®EX-IQ-BOX
303
User Manual 1409.5570.32 ─ 05
Parameters:
<Signal>
CLOW | CHIGh | DLBFrame | DLHFrame | DLNFrame |
ULBFrame | ULHFrame | ULNFrame | TMCLock | RCLock | EXT1 |
EXT2 | EXT3 | NONe
GPIO output settings
In output mode, you can assign the following signals to the GPIO
interface.
CLOW|CHIGh
Sets the control signal to constant level high or low.
DLBFrame|ULBFrame
Takes the information in the CPRI basic frame for control. Accord-
ing to the WCDMA clock rate, the CPRI protocol synchronizes its
basic frame with 3.84 MHz.
DLHFrame|ULHFrame
Uses the CPRI hyper frame clock for control. The hyper frame
clock rate is 15 kHz.
DLNFrame|ULNFrame
Uses the information in the CPRI Node B frame for control. CPRI
updates the B node every 10 ms, i.e. you can control the DUT with
a clock rate of 100 Hz.
TMCLock
Uses the CPRI signal processing clock, e.g. 61.44 MHz at 2x line
rate. This clock is used for timing measurements like response
time, latency, etc..
RCLock
Uses the CPRI signal processing clock, e.g. 61.44 MHz at 2x line
rate. This clock is used for timing measurements like response
time, latency, etc..
EXT1|EXT2|EXT3
In input mode, each of the three GPIO ports provide also an exter-
nal trigger signal.
NONe
Deactivates the GPIO interface.
*RST: 
NONe
Example: 
SOUR1:EBOX:CPRI:HW:GPIO1:SIG DLNBF
use the information in the CPRI Node B frame for control.
Manual operation: See "Signal GPIO 1-3" on page 162
[:SOURce<hw>]:EBOX:CPRI:HW:HSSS:INPut <Input>
The command determines the interface for signal input. Only one interface can be active
at the same time.
Basically the R&S EX-IQ-BOX receives a CPRI signal via one of the optical interfaces
SFP1, or SFP2.
CPRI Remote Control Commands
Remote Control Commands
R&S®EX-IQ-BOX
304
User Manual 1409.5570.32 ─ 05
Parameters:
<Input>
SFP1 | SFP2 | SMA | LOOPback | NONE
SFP1
Selects the SFP1 (Small Form-factor Pluggable) interface, at
which the R&S EX-IQ-BOX is connected to the DUT to receive the
signal.
SFP2
Selects the SFP1 (Small Form-factor Pluggable) interface, at
which the R&S EX-IQ-BOX is connected to the DUT to receive the
signal.
SMA
Select the SMA (SubMiniatur version A) interface, if the R&S EX-
IQ-BOX receives the signal from the DUT on this transmission line.
LOOPback
Assigns the internal loopback, if the signal is routed back inter-
nally.
NONE
Deactivates the input, if no connection is established.
*RST: 
SFP1
Example: 
SOUR1:EBOX:CPRI:HW:HSSS:INP SFP1
assigns SFP1 for signal input.
Manual operation: See "Input (1409.7208.02) ;  Input/Output (1409.7208.04)"
on page 160
[:SOURce<hw>]:EBOX:CPRI:HW:HSSS:OUTPut:SFP1[:STATe] <State>
Determines the SFP1 (Small Form-factor Pluggable) interface for signal output, i.e. aligns
the transmitter type of the DUT. You can activate more than one interface for the signal
output simultaneously, e.g. set SFP1 for signal transmission to the DUT, and SMA for
signal monitoring.
Parameters:
<State>
OFF | ON
*RST: 
ON
Example: 
SOUR1:EBOX:CPRI:HW:HSSS:OUTP:SFP1 ON
activates the SFP1 interface for signal output.
Manual operation: See "Outputs" on page 160
[:SOURce<hw>]:EBOX:CPRI:HW:HSSS:OUTPut:SFP2[:STATe] <State>
Determines the SFP2 (Small Form-factor Pluggable) interface for signal output, i.e. aligns
the transmitter type of the DUT. You can activate more than one interface for the signal
output simultaneously, e.g. set SFP2 for signal transmission to the DUT, and SMA for
signal monitoring.
The numeric suffix to SFP distinguishes between the available SFP interfaces.
CPRI Remote Control Commands
Documents you may be interested
Documents you may be interested