embed pdf in mvc view : Embed pdf into web page software application cloud windows html .net class EX-IQ-BOXK04_OperatingManual_en_0533-part1277

Remote Control Commands
R&S®EX-IQ-BOX
315
User Manual 1409.5570.32 ─ 05
[:SOURce<hw>]:EBOX:CPRI:L1:VERSion?
Queries the CPRI L1 inband protocol version.
Return values: 
<ver>
string
Example: 
EBOX:CPRI:L1:VERS?
Response: 2
Usage: 
Query only
Manual operation: See "Protocol Version" on page 165
9.4.5 CPRI Main Control Commands
The main controls commands provide the selection of the "CPRI test mode", and com-
mands as "State" for activating, "Set to Default" for preset and "Save/Recall" for storing
or loading previously defined settings.
[:​SOURce<hw>]:​EBOX:​CPRI:​MODE​
................................................................................315
[:​SOURce<hw>]:​EBOX:​CPRI:​PRESet​
..............................................................................315
[:​SOURce<hw>]:​EBOX:​CPRI:​STATe​
...............................................................................316
[:​SOURce<hw>]:​EBOX:​CPRI:​VERSion?​
..........................................................................316
[:SOURce<hw>]:EBOX:CPRI:MODE <Mode>
Selects the CPRI test mode. The R&S EX-IQ-BOX simulates either the baseband module
or the RF module to test the appropriate counterpart.
Parameters:
<Mode>
RETest | RECTest
RETest
The R&S EX-IQ-BOX works as RF module for testing the base-
band module (Radio Equipment).
RECTest
The R&S EX-IQ-BOX emulates the baseband module for testing
the RF module (Radio Equipment Control).
*RST: 
RETest
Example: 
SOUR1:EBOX:CPRI:MODE RECT
activate CPRI REC test mode.
Manual operation: See "Mode" on page 152
[:SOURce<hw>]:EBOX:CPRI:PRESet
Sets all parameters to default. Refer to ​chapter A.3.2, "CPRI Default Settings",
on page 372, with an overview of the most important default settings.
Example: 
SOUR1:EBOX:CPRI:PRES
set to CPRI default.
CPRI Remote Control Commands
Embed pdf into web page - Convert PDF to html files in C#.net, ASP.NET MVC, WinForms, WPF application
How to Convert PDF to HTML Webpage with C# PDF Conversion SDK
online convert pdf to html; adding pdf to html page
Embed pdf into web page - VB.NET PDF Convert to HTML SDK: Convert PDF to html files in vb.net, ASP.NET MVC, WinForms, WPF application
PDF to HTML Webpage Converter SDK for VB.NET PDF to HTML Conversion
converting pdf to html format; pdf to html converters
Remote Control Commands
R&S®EX-IQ-BOX
316
User Manual 1409.5570.32 ─ 05
Usage: 
Event
Manual operation: See "Set To Default / Preset" on page 152
[:SOURce<hw>]:EBOX:CPRI:STATe <State>
Activates the CPRI standardized protocol. The corresponding FPGA (Field Programma-
ble Array) is loaded automatically into the R&S EX-IQ-BOX.
Parameters:
<State>
OFF | ON
*RST: 
OFF
Example: 
SOUR1:EBOX:CPRI:STAT ON
activates CPRI protocol transmission.
Manual operation: See "State" on page 152
[:SOURce<hw>]:EBOX:CPRI:VERSion?
Queries the version of currently used CPRI standard protocol version.
Return values: 
<Version>
V4_2 | V5_0
Example: 
EBOX:CPRI:VERS?
Response: 'V5_0'
Usage: 
Query only
9.4.6 CPRI Recorder Subsystem
The CPRI:RECorder subsystem contains all remote-control commands that are rele-
vant for recording an I/Q signal and storing the recorded data in a waveform file.
[:​SOURce<hw>]:​EBOX:​CPRI:​RECorder<ch>:​ABORt​
.........................................................317
[:​SOURce<hw>]:​EBOX:​CPRI:​RECorder<ch>:​DATA:​SOURce​
.............................................317
[:​SOURce<hw>]:​EBOX:​CPRI:​RECorder<ch>:​DATA:​SOURce:​CATalog?​
.............................317
[:​SOURce<hw>]:​EBOX:​CPRI:​RECorder<ch>:​DATA:​SRATe?​
.............................................317
[:​SOURce<hw>]:​EBOX:​CPRI:​RECorder<ch>:​EXECute​
......................................................318
[:​SOURce<hw>]:​EBOX:​CPRI:​RECorder<ch>:​FILE:​CREate​
................................................318
[:​SOURce<hw>]:​EBOX:​CPRI:​RECorder<ch>:​FILE:​SELect​
.................................................318
[:​SOURce<hw>]:​EBOX:​CPRI:​RECorder<ch>:​RLENgth​
......................................................319
[:​SOURce<hw>]:​EBOX:​CPRI:​RECorder<ch>:​RTIMe?​
.......................................................319
[:​SOURce<hw>]:​EBOX:​CPRI:​RECorder<ch>:​STATe?​
.......................................................319
[:​SOURce<hw>]:​EBOX:​CPRI:​RECorder<ch>:​STATus?​
.....................................................320
[:​SOURce<hw>]:​EBOX:​CPRI:​RECorder<ch>:​TRIGger:​POSition​
.........................................320
[:​SOURce<hw>]:​EBOX:​CPRI:​RECorder<ch>:​TRIGger:​SOURce​
.........................................321
[:​SOURce<hw>]:​EBOX:​CPRI:​RECorder<ch>:​VIEW​
...........................................................321
CPRI Remote Control Commands
C# Image: How to Integrate Web Document and Image Viewer
RasterEdgeImagingDeveloperGuide8.0.pdf: from this user manual, you can Embed Document Viewer to Your ASPX Web Page. insert the web document viewer into your own
to html; pdf to web converter
C# TIFF: C#.NET Code to Create Online TIFF Document Viewer
We still demonstrate how to create more web viewers on PDF and Word documents at the If you want to embed .NET Web TIFF Document Viewer DLL into your C#
pdf to html converter; convert pdf to html format
Remote Control Commands
R&S®EX-IQ-BOX
317
User Manual 1409.5570.32 ─ 05
[:SOURce<hw>]:EBOX:CPRI:RECorder<ch>:ABORt
Stops and cancels the recording. You can abort the recording at any time and restart
again.
Example: 
SOUR1:EBOX:CPRI:REC:ABOR
stops recording.
Usage: 
Event
Manual operation: See "Abort / Discard" on page 211
[:SOURce<hw>]:EBOX:CPRI:RECorder<ch>:DATA:SOURce <Source>
Selects the signal source of the signal to be recorded. All RX signals are available. In
order to record a signal, the signal must be selected in the respective RX dialog. Either
the uplink signal in CPRI RE test mode, or the downlink signal of the CPRI REC testmode
are possible. Assign the signal "DIG OUT 2 IQ / Recorder" or "Recorder" under ​[:​
SOURce<hw>]:​EBOX:​CPRI:​RX:​SIGNal<ch>:​OUTPut​ on page 331. Switch on signal
state, see ​[:​SOURce<hw>]:​EBOX:​CPRI:​TX|RX:​SIGNal<ch>:​STATe​ on page 352.
Parameters:
<Source>
string
String parameter to specify the I/Q data source of the signal to be
recorded.
Example: 
SOUR1:EBOX:CPRI:REC:DATA:SOUR "signal_1"
select the signal_1 for recording.
Manual operation: See "Data Source" on page 209
[:SOURce<hw>]:EBOX:CPRI:RECorder<ch>:DATA:SOURce:CATalog?
Returns a list of data sources, i.e. output signals in the current, or specified directory.
Return values: 
<Srcs>
string
Example: 
SOUR1:EBOX:CPRI:REC:DATA:SOUR:CAT?
read out all waveform files of the current directory.
Usage: 
Query only
Manual operation: See "Data Source" on page 209
[:SOURce<hw>]:EBOX:CPRI:RECorder<ch>:DATA:SRATe?
Queries the sample rate of the recorded signal.
Return values: 
<Srate>
float
*RST: 
3840000
Default unit: Hz
CPRI Remote Control Commands
C# TIFF: How to Insert & Burn Picture/Image into TIFF Document
Entire C# Code to Embed and Burn Image to TIFF GetPage(0); // load an PNG logo into REImage REImage powerful & profession imaging controls, PDF document, tiff
add pdf to website; convert pdf to web pages
VB.NET TIFF: Rotate TIFF Page by Using RaterEdge .NET TIFF
formats are: JPEG, PNG, GIF, BMP, PDF, Word (Docx Visual Basic .NET class, and then embed "RasterEdge.Imaging splitting huge target TIFF file into multiple and
convert pdf into html email; how to convert pdf to html
Remote Control Commands
R&S®EX-IQ-BOX
318
User Manual 1409.5570.32 ─ 05
Example: 
SOUR1:EBOX:CPRI:REC:DATA:SRAT?
query the sample rate value of the selected signal.
Usage: 
Query only
Manual operation: See "Sample Rate" on page 210
[:SOURce<hw>]:EBOX:CPRI:RECorder<ch>:EXECute
Starts the recording.
Example: 
SOUR1:EBOX:CPRI:REC:EXEC
starts recording of the currently selected signal.
Usage: 
Event
Manual operation: See "Record" on page 211
[:SOURce<hw>]:EBOX:CPRI:RECorder<ch>:FILE:CREate
This command creates a file and stores the recorded data.
Note:R&S DigIConf stores the recorded data in the waveform file format with the prede-
fined file extension *.wv. By default, waveform files are stored in the directory %Pro-
gram Files%/Rohde-Schwarz/DigIConf/Settings, unless another directory is selected.
File name and the directory are user-selectable.
Parameters:
<path>, <filename>
String parameter to specify directory, path and filename.
Example: 
SOUR1:EBOX:CPRI:REC:FILE:CRE
save the recorded data in a file
Usage: 
Event
Manual operation: See "Save to File" on page 211
[:SOURce<hw>]:EBOX:CPRI:RECorder<ch>:FILE:SELect <Select>
Saves the the recorded data in a file. Filename and directory are specified within the
command.
If no file of the specified name exists, it is created. The file extension may be omitted.
R&S DigIConf stores the recorded I/Q data streams in the R&S WinIQSim2 waveform
file format with the predefined file extension *.wv.
Setting parameters: 
<Select>
<path>, <file_name>
String parameter to select directory, path and file name.
Example: 
SOUR1:EBOX:CPRI:REC:FILE:SEL "D:
\3GPP_CPRIRE.wv"
select the recorded file 3GPP_CPRIRE.wv from D:\ directory.
Usage: 
Setting only
CPRI Remote Control Commands
C# Image: How to Deploy .NET Imaging SDK in Visual C# Applications
dll; RasterEdge.Imaging.MSWordDocx.dll; RasterEdge.Imaging.PDF.dll; Copy and embed your required DLL libraries into our C#.NET Imaging SDK into web server project
convert fillable pdf to html form; convert fillable pdf to html
Generate Image in .NET Winforms Imaging Viewer| Online Tutorials
use WinForms .NET Imaging SDK to generate and embed a barcode Create a Barcode into Image. Multi-page Tiff Processing; RasterEdge OCR Engine; PDF Reading; Encode
convert pdf to html for online; convert pdf to url link
Remote Control Commands
R&S®EX-IQ-BOX
319
User Manual 1409.5570.32 ─ 05
Manual operation: See "Save" on page 211
[:SOURce<hw>]:EBOX:CPRI:RECorder<ch>:RLENgth <Length>
Sets the data length to be recorded in samples.
Parameters:
<Length>
integer
Specifies the number of samples to be recorded.
Range: 
 to  128000000
Increment: 1
*RST: 
100 Samples
Example: 
SOUR1:EBOX:CPRI:REC:RLENgth 1024
record 1024 samples of the signal.
Manual operation: See "Recording Length" on page 209
[:SOURce<hw>]:EBOX:CPRI:RECorder<ch>:RTIMe?
Queries the recording time. The recording time results from the recording length and the
sample rate.
Return values: 
<Duration>
float
Range: 
0 to 2147483647 s
Increment: 0.000001
*RST: 
0
Default unit: s
Example: 
SOUR1:EBOX:CPRI:REC:RTIM?
returns the time needed for recording.
Usage: 
Query only
Manual operation: See "Recording Time" on page 210
[:SOURce<hw>]:EBOX:CPRI:RECorder<ch>:STATe?
This command queries whether the selected data source signal is active or not. If inactive,
the recorder cannot be started.
Return values: 
<State>
0 | 1
*RST: 
OFF
Example: 
SOUR1:EBOX:CPRI:REC:STAT?
Response: 0 (inactive)
Usage: 
Query only
CPRI Remote Control Commands
VB.NET Image: VB.NET Code to Add Rubber Stamp Annotation to Image
Suitable for VB.NET PDF, Word & TIFF document managing & editing project. VB.NET Rubber Stamp Can be implemented into both Windows and web VB.NET
convert from pdf to html; convert pdf to html5
C# PowerPoint: Create Web Document Viewer for PowerPoint Viewing
converting and saving web PowerPoint document to PDF and TIFF. a web application and then add and embed Web PowerPoint Document Viewer into a web page.
change pdf to html; convert pdf to url
Remote Control Commands
R&S®EX-IQ-BOX
320
User Manual 1409.5570.32 ─ 05
[:SOURce<hw>]:EBOX:CPRI:RECorder<ch>:STATus?
Return values: 
<Status>
IDLE | FRUN | READy | WTRigger | TRIGgered | DONE
Returns the state of the recording process.
IDLE
Recording is inactive. Configure the recorder in that state.
The recorder remains in "Idle" state until you start with Execute.
FRUN
The recorder records the signal continuously in a ring memory.
These data are required for pre-trigger analyzes.
READy
Recording has passed through the ring memory once at least, i.e.
it has described the memory completely. At this point the data is
valid and R&S DigIConf activates the trigger signal automatically.
WTRigger
The recorder continues recording until the trigger event occurs.
Then the process switches to the next state.
If trigger source "Software" is used, the trigger event occurs imme-
diately.
TRIGgered
After the trigger event, only the remaining samples after the trigger
position are recorded (post-trigger data).
DONE
If all post-trigger data are recorded, the recording is completed and
the recorder stops. The data is available in the memory.
*RST: 
IDLE
Example: 
SOUR1:EBOX:CPRI:REC:STAT?
Response: WTR, i.e. the process is waiting for a trigger event.
Usage: 
Query only
Manual operation: See " Recorder Status Diagram" on page 210
[:SOURce<hw>]:EBOX:CPRI:RECorder<ch>:TRIGger:POSition <Position>
Determine the position of the trigger event on the waveform. The position provides to
realize a pre-trigger recording, as well as a post-trigger recording. The value is set in the
samples from 0 to Recording Length-1.
Post-trigger, i.e. position 0 at the beginning of the waveform enables to evaluate the
signal after the trigger event.
Pre Trigger, with the trigger position at the end of the waveform, provides the evalu-
ation of the signal before the trigger event.
CPRI Remote Control Commands
Remote Control Commands
R&S®EX-IQ-BOX
321
User Manual 1409.5570.32 ─ 05
Parameters:
<Position>
integer
Specify a numeric value.
Range: 
 to  99
Increment: 1
*RST: 
0
Example: 
SOUR1:EBOX:CPRI:REC:TRIG:POS 2
set trigger position 2.
Manual operation: See "Trigger Position" on page 209
[:SOURce<hw>]:EBOX:CPRI:RECorder<ch>:TRIGger:SOURce <Source>
Select the trigger source for starting the recording. A trigger event can be initiated by the
software itself or by hardware events.
Parameters:
<Source>
SOFTware | EXT1 | EXT2 | EXT3 | TXBF | TXHF | TXNF | RXBF |
RXHF | RXNF | SYNC
SOFTware
Software trigger starts the recording immediately after the record
is switched on. No other event is necessary.
EXT1...3
Starts recording with an external trigger event.
External trigger events are generated by the hardware and fed at
the GENERAL PURPUSE IO interface.
TXBF|TXHF|TXNF|RXBF|RXHF|RXNF
Starts recording with an external trigger event. These trigger
events come within the CPRI communication link.
Available trigger evens are:
CPRI DL/UL Basic Frame: TXBF | RXBF
CPRI DL/UL Hyper Frame: TXHF | RXHF
CPRI DL/UL NodeB Frame: TXNF | RXNF
SYNC
Starts recording after a specific dync pattern is received.
*RST: 
SOFTware
Example: 
SOUR1:EBOX:CPRI:REC:TRIG:SOUR EXT2
start recording with an external trigger event, fed at the 2nd GPIO
interface.
Manual operation: See " Trigger Source" on page 209
[:SOURce<hw>]:EBOX:CPRI:RECorder<ch>:VIEW
Calls the viewer program ARB toolbox, to view the currently loaded IQ data stream.
CPRI Remote Control Commands
Remote Control Commands
R&S®EX-IQ-BOX
322
User Manual 1409.5570.32 ─ 05
Example: 
EBOX:CPRI:REC:VIEW "d:
\user\temp\qpsk_dirac_3_84Hz"
calls the ARB toolbox to view the IQ content of the file.
Usage: 
Event
Manual operation: See "View" on page 212
9.4.7 CPRI Settings Subsystem
With the commands of the SETTing subsystem, you can save settings of a CPRI appli-
cation, or recall previously saved configurations. It covers all commands for file handling.
[:​SOURce<hw>]:​EBOX:​CPRI:​SETTing:​CATalog?​
.............................................................322
[:​SOURce<hw>]:​EBOX:​CPRI:​SETTing:​DELete​
.................................................................322
[:​SOURce<hw>]:​EBOX:​CPRI:​SETTing:​LOAD​
...................................................................323
[:​SOURce<hw>]:​EBOX:​CPRI:​SETTing:​STORe​
.................................................................323
[:SOURce<hw>]:EBOX:CPRI:SETTing:CATalog?
The command queries the available settings files in the specified directory. Settings files
are used to store current application settings. Only files with the file extension *.cpri will
be listed.
Access to the files via remote is possible using the commands of the MEMM subsystem.
Return values: 
<Catalog>
string
String parameter to select the directory where settings files are
stored.
Example: 
MEMM:CDIR "d:\DigIConf\Settings\CPRI"
Set the default directory and path to
d:\DigIConf\Settings\CPRI.
SOUR1:EBOX:CPRI:SETT:CAT?
read out all settings files of the \DigIConf\Settings\CPRI
directory on drive d:
Usage: 
Query only
Manual operation: See "Save / Recall" on page 152
[:SOURce<hw>]:EBOX:CPRI:SETTing:DELete <Delete>
The command removes a settings file from the specified directory.
Setting parameters: 
<Delete>
<directory>, <file_name>, <ext>
Determine the file to be deleted by adding directory, file name and
the file extension (*.cpri).
CPRI Remote Control Commands
Remote Control Commands
R&S®EX-IQ-BOX
323
User Manual 1409.5570.32 ─ 05
Example: 
SOUR1:EBOX:CPRI:SETT:DEL "d:
\DigIConf\Settings\CPRI\RETest.cpri"
delete the file RETest.cpri.
Usage: 
Setting only
[:SOURce<hw>]:EBOX:CPRI:SETTing:LOAD <Load>
The command loads a previously saved CPRI configuration. Define directory and file
name, R&S DigIConf automatically assigns the file extension *.cpri.
Setting parameters: 
<Load>
<directory>, <file_name>
String parameter to determine the target directory and the file-
name for loading the settings file.
Example: 
SOUR1:EBOX:CPRI:SETT:LOAD "D:
/USER/CPRISettings/RETest"
load the CPRI settings file RETest.cpri from the directory
d:\USER\CPRISettings.
Usage: 
Setting only
Manual operation: See "Save / Recall" on page 152
[:SOURce<hw>]:EBOX:CPRI:SETTing:STORe <Store>
Saves the current CPRI signal configuration. Specify the directory and file name.
R&S DigIConf automatically assigns the file extension *.cpri to CPRI configuration
files.
Setting parameters: 
<Store>
<directory>, <file_name>
String parameter to determine the target directory and the file-
name for storing the settings file.
Example: 
SOUR1:EBOX:CPRI:SETT:STOR "D:
/USER/CPRISettings/RETest"
save the currently defined CPRI settings in the file
RETest.cpri in the directory d:\USER\CPRISettings.
Usage: 
Setting only
Manual operation: See "Save / Recall" on page 152
9.4.8 CPRI Test & Diagnostics Subsystem
The TEST: & Diagnostics subsystem contains the remote-control commands to get
information on the SFP transceiver connection and RX alarms. You also find the com-
mands for executing a low level BER test in this panel.
CPRI Remote Control Commands
Remote Control Commands
R&S®EX-IQ-BOX
324
User Manual 1409.5570.32 ─ 05
The numeric suffix to SFP<st> distinguishes the SFP interfaces (SFP1,SFP2).
[:​SOURce<hw>]:​EBOX:​CPRI:​TEST:​BER:​RX:​RATE?​
.........................................................324
[:​SOURce<hw>]:​EBOX:​CPRI:​TEST:​BER:​RX:​STATe​
.........................................................324
[:​SOURce<hw>]:​EBOX:​CPRI:​TEST:​BER:​RX:​WORDs?​
......................................................325
[:​SOURce<hw>]:​EBOX:​CPRI:​TEST:​BER:​TX:​STATe​
..........................................................325
[:​SOURce<hw>]:​EBOX:​CPRI:​PRBS:​RST​
.........................................................................325
[:​SOURce<hw>]:​EBOX:​CPRI:​TEST:​RX:​LOF?​
...................................................................325
[:​SOURce<hw>]:​EBOX:​CPRI:​TEST:​RX:​LOS?​
...................................................................326
[:​SOURce<hw>]:​EBOX:​CPRI:​TEST:​RX:​RAI?​
....................................................................326
[:​SOURce<hw>]:​EBOX:​CPRI:​TEST:​RX:​RESet?​
................................................................326
[:​SOURce<hw>]:​EBOX:​CPRI:​TEST:​RX:​SDI?​
....................................................................327
[:​SOURce<hw>]:​EBOX:​CPRI:​TEST:​SFP<st>:​INFO?​
.........................................................327
[:​SOURce<hw>]:​EBOX:​CPRI:​TEST:​SFP<st>:​LOS?​
..........................................................327
[:​SOURce<hw>]:​EBOX:​CPRI:​TEST:​SFP<st>:​TX:​DISabled?​
...............................................328
[:​SOURce<hw>]:​EBOX:​CPRI:​TEST:​SFP<st>:​TX:​FAULt?​
...................................................328
[:​SOURce<hw>]:​EBOX:​CPRI:​TEST:​TX:​REReset​
..............................................................328
[:​SOURce<hw>]:​EBOX:​CPRI:​TEST:​TX:​SDI​
......................................................................329
[:SOURce<hw>]:EBOX:CPRI:TEST:BER:RX:RATE?
The command queries the number of bit errors. This function consecutively counts the
number of discrepancies that occur during the test. The BER result is the ratio, which is
calculated by dividing the number of error bits by the total number of bits.
Return values: 
<Rate>
float
Range: 
 to  1.000
Increment: 0.01
*RST: 
0
Example: 
SOUR1:EBOX:CPRI:TEST:BER:RX:RATE?
query the number of bit errors.
Response: 2
2 bit errors occured during low level BER test.
Usage: 
Query only
Manual operation: See "Rx BER" on page 193
[:SOURce<hw>]:EBOX:CPRI:TEST:BER:RX:STATe <State>
Switches on the test receiver.
Parameters:
<State>
ON | OFF
*RST: 
OFF
Example: 
SOUR1:EBOX:CPRI:TEST:BER:RX:STAT ON
switch on test receiver.
CPRI Remote Control Commands
Documents you may be interested
Documents you may be interested