authorized to be stalled, except as permitted in this Agreement.
10.2. Disclaimer. Other than the warranty set forth in Section 10.1 above,
and to the maximum extent permitted by applicable law, Foxit, its
authorized resellers and their subsidiaries provides the Product and any
support services related to the Product ("Support Services") AS IS AND
WITH ALL FAULTS, and hereby disclaim all other warranties and
conditions, either express, implied or statutory, including, but not limited
to, any implied warranties, duties or conditions of merchantability, of
fitness for a particular purpose, of accuracy or completeness of
responses, of results, of workmanlike effort, of lack of viruses, and of
lack of negligence, all with regard to the Product, and the provision of or
failure to provide support services.
11. LIMIT OF LIABILITY AND EXCLUSION OF INCIDENTAL, CONSEQUENTIAL
AND CERTAIN OTHER DAMAGES. TO THE MAXIMUM EXTENT PERMITTED BY
APPLICABLE LAW, IN NO EVENT SHALL FOXIT, ITS AUTHORIZED RESELLERS OR
THEIR SUBSIDIARIES BE LIABLE FOR ANY SPECIAL, INCIDENTAL, INDIRECT,
PUNITIVE OR CONSEQUENTIAL DAMAGES WHATSOEVER (INCLUDING, BUT
NOT LIMITED TO, DAMAGES FOR LOSS OF PROFITS OR CONFIDENTIAL OR
OTHER INFORMATION, FOR BUSINESS INTERRUPTION, FOR PERSONAL INJURY,
FOR LOSS OF PRIVACY, FOR FAILURE TO MEET ANY DUTY INCLUDING OF GOOD
FAITH OR OF REASONABLE CARE, FOR NEGLIGENCE, AND FOR ANY OTHER
PECUNIARY OR OTHER LOSS WHATSOEVER) ARISING OUT OF OR IN ANY WAY
RELATED TO THE USE OF OR INABILITY TO USE THE PRODUCT, THE PROVISION
OF OR FAILURE TO PROVIDE SUPPORT SERVICES, OR OTHERWISE UNDER OR
IN CONNECTION WITH ANY PROVISION OF THIS LICENSE, EVEN IN THE EVENT
OF THE FAULT, TORT (INCLUDING NEGLIGENCE), STRICT LIABILITY, BREACH
OF CONTRACT OR BREACH OF WARRANTY OF FOXIT, EVEN IF FOXIT HAS BEEN
ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.
11.1. LIMITATION OF LIABILITY AND REMEDIES. Notwithstanding any
damages that You might incur for any reason whatsoever (including,
without limitation, all damages referenced above and all direct or general
damages), the entire liability of Foxit, its resellers and their subsidiaries
under any provision of this License and Your exclusive remedy for all of
the foregoing shall be limited to the amount actually paid by You for the
Product. The foregoing limitations, exclusions and disclaimers shall apply
to the maximum extent permitted by applicable law, even if any remedy
fails its essential purpose.
11.2. NOTICE TO U.S. GOVERNMENT END USERS
11.3. For contracts with agencies of the Department of Defense, the
Government’s rights in: (1) commercial computer software and
commercial computer software documentation shall be governed,
pursuant to 48 C.F.R. 227.7201 through 227.7202-4, by Foxit’s standard
commercial license(s) for the respective product(s); (2) software and
software documentation other than commercial computer software and
commercial computer software documentation shall be governed by 48
C.F.R. 252.227-7014; (3) technical data for commercial items other than
software or software documentation shall be governed by 48 C.F.R.
252.227-7015(b); and (4) technical data for non-commercial items other
than software or software documentation shall be governed by 48 C.F.R.
11.4. For contracts with U.S. Government agencies other than the
Department of Defense agencies, the Government’s rights in: (1)
commercial computer software and commercial computer software
documentation shall be governed, pursuant to 48 C.F.R. 2.101 and
12.212, by Foxit’s standard commercial license(s) for the respective
product(s); (2) software and software documentation other than
commercial computer software and commercial computer software
documentation shall be governed by 48 C.F.R. 52.227-14, Alternative III;
and (3) technical data other than software and software documentation
shall be governed by 48 C.F.R. 52.227-14 including, where applicable
Alternatives I or II.
12. GENERAL. This Agreement will be governed by and construed in
accordance with the laws of the State of California excluding that body of laws
known as conflicts of law. The United Nations Convention on Contracts for the
International Sale of Goods will not apply. Any legal action or proceeding
arising under this Agreement will be brought exclusively in the federal or state
courts located in San Jose, California and the parties hereby irrevocably consent
to the personal jurisdiction and venue therein. You may not assign this
Agreement or any right or interest hereunder, by operation of law or otherwise,
without Foxit’s express prior written consent. Any attempt to assign this
Agreement, without such consent, will be null and of no effect. Subject to the
foregoing, this Agreement will bind and inure to the benefit of each party's
successors and permitted assigns. Except as expressly set forth in this
Agreement, the exercise by either party of any of its remedies under this
Agreement will be without prejudice to its other remedies under this Agreement
or otherwise. If for any reason a court of competent jurisdiction finds any
provision of this Agreement invalid or unenforceable, that provision of the
Agreement will be enforced to the maximum extent permissible and the other
provisions of this Agreement will remain in full force and effect. All notices or
approvals required or permitted under this Agreement will be in writing and
delivered by confirmed facsimile transmission, by overnight delivery services,
or by certified mail, and in each instance will be deemed given upon receipt. All
notices or approvals will be sent to the addresses set forth in the applicable
ordering document or invoice or to such other address as may be specified by
either party to the other in accordance with this section. Neither party will be
responsible for any failure or delay in its performance under this Agreement
(except for any payment obligations) due to causes beyond its reasonable
control, including, but not limited to, labor disputes, strikes, lockouts, shortages
of or inability to obtain labor, energy or supplies, war, terrorism, riot, or acts of
God. The failure by either party to enforce any provision of this Agreement will
not constitute a waiver of future enforcement of that or any other provision. This
Agreement, including Foxit’s support and maintenance services terms
constitutes the entire and exclusive agreement between the parties concerning
its subject matter and supersedes all prior written and oral understandings and
agreements between the parties regarding its subject matter. The terms and
conditions contained in any customer purchase order or other ordering
document that are inconsistent with or in addition to the terms and conditions of
this Agreement are hereby rejected by Foxit and will be deemed null and of no
13. COMPLIANCE WITH LICENSES. If You are a business, company or
organization, You agree that upon request from Foxit or its authorized
representative You will within thirty (30) days fully document and certify that
use of any and all Foxit Products at the time of the request is in conformity with
Your valid licenses from Foxit.
14. DISCONTINUING OR MODIFYING SERVICES. You acknowledge that Foxit
has the right to discontinue the manufacture and development of any of the
Product and the support for that Product, in its sole discretion at any time,
including the distribution of older Product versions, provided that Foxit agrees
not to discontinue the support for that Product during the current annual term of
this Agreement, subject to the termination provisions herein. Notwithstanding
the foregoing, if Foxit discontinues the manufacture and support for a particular
Product, Support for any remaining Products covered by this Agreement shall
not be adversely affected. Foxit reserves the right to alter the Support, in its
sole discretion but in no event shall such alterations result in: (a) diminished
support from the level of support set forth herein; (b) materially diminished
obligations for Foxit; or (c) Your materially diminished rights.
15. Should You have any questions concerning this License, or if You desire to
contact Foxit for any reason, please call (510) 438-9090.
Chapter 1 – Overview
PhantomPDF™ Advanced Editor (“Advanced Editor”) extends the
usability of PDF documents by enabling the user to edit PDF files in a What You
See Is What You Get (WYSIWYG) way. Advanced Editor is proud to be the first,
and up to the time when this manual was printed, the only PDF Editor that
allows you to modify existing PDF documents in an easy and efficient way, yet
retain all rich features for viewing and printing provided by PDF document
Advanced Editor is a revolutionary program in editing PDF files. Its goal is to
give the user a friendly editing interface and make the user feel that they are
editing a common document, like with a common editor. Advanced Editor offers
the user flexibility to modify or customize anything in the page contents of a PDF
PDF Document Concepts
PDF stands for Portable Document Format, which can be used to exchange and
distribute documents in a manner independent of the application software,
hardware, and operating system used to create it.
A PDF document contains one or more pages. Each page in the document may
comprise a sequence of objects. An object can be a text object which contains
a number of text characters, a graph object which contains straight lines,
rectangles, and cubic curves, an image object which is made of a set of colored
pixels, or a shading object which contains a smooth transition between colors
across an area.
Each object contains a series of attributes that determine what the object looks
like. Text Objects use fonts to specify how the characters look, and font sizes
to specify how large those characters are. Graph objects have attributes like
line width, and fill type and more. Shading objects offers linear and radial
gradients. All objects have common attributes like position, size, and
orientation. There are many more attributes defined for PDF page objects,
please refer to the following chapters for a detailed explanation of all object
Why Advanced Editor
Edit PDF documents directly! As PDF becomes more important in the field of
document publishing, there is an increasing need to use and edit PDF
This demand had led to the conversion of PDF to other types of files, such as
Microsoft Word file. However, this however usually causes data or format loss
during the conversion process. Furthermore, PDF files are converted into other
types of files and then converted back. Often, things have been changed during
the double conversion. Hence users have to almost rebuild the whole document
What if there is a way to edit PDF documents directly that is reliable and easy to
use? The answer is Advanced Editor, the first and only REAL editor for PDF files.
PDF Document Copyrights Issue
Many PDF documents come with copyrights reserved by the author, or owner of
the intellectual property. And in many cases the owner of copyrights may
prohibit anyone else to alter the document in any way.
Advanced Editor by no means is designed to breach those copyrights. However,
it’s up to the users of Advanced Editor to observe the copyright, if the document
is not protected in any technical way.
With Advanced Editor, you are able to edit any user password protected
documents. But you can only Save As the document if you have no password. If
a document is not protected by password but is encrypted with modification
permission prohibited, it cannot be edited by Advanced Editor.
Updating Advanced Editor
Checking for updates detects new versions of Advanced Editor and keeps you
updated with the latest release. You can detect updates from the Help menu on
PhantomPDF™ Business 5.1.
Choose Help > Check for Updates Now…
If there is an update for Advanced Editor for you, select “Advanced Editor”
from the column on the left, and click Add to move it to the right column.
Chapter 2 – Getting Started
This section gives you an overview of Advanced Editor 5.1, including system
requirement, installation, registration, work area, un-installation, etc.
Installing Advanced Editor
Windows System Requirements
Advanced Editor runs successfully on:
Windows Server 2003
How to Install?
Step One – Download the Package
PhantomPDF™ Business is distributed via web download. Firstly, you
should download and install Foxit PhantomPDF Business, and then click
“Advanced Editor” to run Foxit PhantomPDF Advanced Editor immediately.
Step Two – Installing the Software
After running the Foxit PhantomPDF Business setup program, you will need to
execute the following steps to finish setup:
1. Welcome Screen – Click Next button to continue, and click Cancel button
to abort the setup.
2. License Agreement – Only after you check the box of “I accept the terms
in the License Agreement”, you can click Next button to continue.
3. Choose Setup Type – Choose the setup type that best suits your needs.
Complete – Installs all program features. It will expressly finish Foxit
PhantomPDF Business Setup, also requires the most disk space.
Custom – Allows you to choose which program features can be installed
and where to install. The default location is: C:\Program Files\Foxit
Software\Foxit PhantomPDF\. Following are steps you will go through:
a) Choose the features you don’t want to install in the left box. You can
choose the feature unavailable button
from the drop down list of
the related features.
b) Click Browse… button to change the location where you want to install
c) Click Next button to continue the setup
4. Select additional tasks.
5. RMS Server configuration (Optional) – Input the server name you want
to connect, you can skip and configure it later if needed.
6. Click Install button to start.
Documents you may be interested
Documents you may be interested