c# : winform : pdf viewer : Add document to pdf pages control software system web page windows .net console RS_SigGen_GNSS_Operating_en_0821-part1424

Remote-Control Commands
Satellite Navigation
211
Operating Manual 1173.1427.12 ─ 08
//Response: 20531267.5147461
SOURce1:BB:GPS:SATellite1:PRBias 0
SOURce1:BB:GPS:SATellite1:TSHift?
//Response: 70060.0902627953
SOURce1:BB:GPS:SATellite1:DSHift?
//Response: 1146.05037064872
SOURce1:BB:GPS:SATellite1:ICPHase?
//Response: 6.25362425028864
SOURce1:BB:GPS:SATellite1:FREQuency?
//Response: 1575421146.05037
SOURce1:BB:GPS:SATellite1:CACRate?
//Response: 1023000.74418801
SOURce1:BB:GPS:SVID19:GPS:MPAT:STATe?
//Response: 0
SOURce1:BB:GPS:SATellite1:STATe?
//Response: 1
SOURce1:BB:GPS:SATellite5:STANdard?
//Response: BEID
SOURce1:BB:GPS:SATellite5:SIGNal?
//Response: B1C
SOURce1:BB:GPS:SATellite5:SVID?
//Response: 33
SOURce1:BB:GPS:SATellite5:ORBit?
//Response: MEO
SOURce1:BB:GPS:SATellite7:STANdard?
//Response: GLON
SOURce1:BB:GPS:SATellite7:SIGNal?
//Response: RCA
SOURce1:BB:GPS:SATellite7:SVID?
//Response: 14
SOURce1:BB:GPS:SATellite7:FNUMber?
//Response: -7
SOURce1:BB:GPS:SATellite7:SCRate?
//Response: 511000
SOURce1:BB:GPS:STATe ON
SOURce1:BB:GPS:HDOP?
//Response: 1.12895407129922
SOURce1:BB:GPS:PDOP?
//Response: 2.15878433755758
<subsystem>:SPReading[:STATe]
...................................................................................212
<subsystem>:SEMask
....................................................................................................212
<subsystem>:HDOP?
.....................................................................................................213
<subsystem>:PDOP?
.....................................................................................................213
<subsystem>:GALModulation
..........................................................................................213
<subsystem>:GOConstellation
........................................................................................213
<subsystem>:SATellite:GRTProjection
.............................................................................214
Satellites Configuration and Satellites Signal Settings
Add document to pdf pages - insert pages into PDF file in C#.net, ASP.NET, MVC, Ajax, WinForms, WPF
Guide C# Users to Insert (Empty) PDF Page or Pages from a Supported File Format
add page numbers pdf file; adding page numbers to a pdf document
Add document to pdf pages - VB.NET PDF Page Insert Library: insert pages into PDF file in vb.net, ASP.NET, MVC, Ajax, WinForms, WPF
Easy to Use VB.NET APIs to Add a New Blank Page to PDF Document
add document to pdf pages; add contents page to pdf
Remote-Control Commands
Satellite Navigation
212
Operating Manual 1173.1427.12 ─ 08
<subsystem>:SATellite:COUNt
........................................................................................214
<subsystem>:SATellite<st>:CACRate?
............................................................................214
<subsystem>:SATellite<st>:DSHift
...................................................................................215
<subsystem>:SATellite<st>:DURation?
............................................................................215
<subsystem>:SATellite<st>:FNUMber
..............................................................................215
<subsystem>:SATellite<st>:FREQuency?
........................................................................216
<subsystem>:SATellite<st>:CPHase
................................................................................216
<subsystem>:SATellite<st>:ICPHase
...............................................................................216
<subsystem>:SATellite<st>:PCRate?
...............................................................................216
<subsystem>:SATellite<st>:MODulation
...........................................................................217
<subsystem>:SATellite<st>:ORBit
...................................................................................217
<subsystem>:SATellite<st>:PRANge
...............................................................................217
<subsystem>:SATellite<st>:PRBias
.................................................................................218
<subsystem>:SATellite<st>:SCRate?
...............................................................................218
<subsystem>:SATellite<st>:SIGNal
.................................................................................218
<subsystem>:SATellite<st>:STANdard
.............................................................................218
<subsystem>:SATellite<st>:STATe
..................................................................................219
<subsystem>:SATellite<st>:SVID
....................................................................................219
<subsystem>:SATellite<st>:TSHift
...................................................................................219
<subsystem>:SPReading[:STATe] <State>
Activates/deactivates spreading. When spreading is deactivated the pure navigation
data is modulated onto the RF carrier.
This setting is only available for <subsystem>:​SMODe​STATic.
Parameters:
<State>
0 | 1 | OFF | ON
*RST: 
1
Example: 
BB:GPS:SMOD STAT
BB:GPS:SPR:STAT ON
Manual operation: See "Use Spreading" on page 100
<subsystem>:SEMask <SEMask>
For <subsystem>:​SMODe​ AUTO or USER, sets the satellite's elevation mask.
Parameters:
<SEMask>
float
Range: 
2.5  to  10.0
*RST: 
5
Example: 
See example "Configuring the satellite's constellation"
on page 210.
Manual operation: See "Elevation Mask" on page 101
Satellites Configuration and Satellites Signal Settings
C# PDF Page Extract Library: copy, paste, cut PDF pages in C#.net
pageIndexes.Add(3); // The 4th page. Create the new document with 3 String outputFilePath = Program.RootPath + "\\" Output.pdf"; newDoc.Save(outputFilePath
add pages to pdf document; add and remove pages from pdf file online
VB.NET PDF Page Extract Library: copy, paste, cut PDF pages in vb.
pageIndexes.Add(3) ' The 4th page Create the new document with 3 Dim outputFilePath As String = Program.RootPath + "\\" Output.pdf" newDoc.Save(outputFilePath
add remove pages from pdf; add a page to a pdf in reader
Remote-Control Commands
Satellite Navigation
213
Operating Manual 1173.1427.12 ─ 08
<subsystem>:HDOP?
For <subsystem>:​SMODe​ AUTO or USER, queries the HDOP (Horizontal Dilution of
Precision) of the selected satellite constellation at the beginning of the simulation.
Return values: 
<Hdop>
float
Increment: 0.01
Example: 
See example "Configuring the satellite's constellation"
on page 210.
Usage: 
Query only
Manual operation: See "Initial HDOP/PDOP" on page 101
<subsystem>:PDOP?
For <subsystem>:​SMODe​ AUTO or USER, queries the PDOP (Position Dilution of Pre-
cision) of the selected satellite constellation at the beginning of the simulation.
Return values: 
<PDop>
float
Increment: 0.01
*RST: 
0
Example: 
See example "Configuring the satellite's constellation"
on page 210.
Usage: 
Query only
Manual operation: See "Initial HDOP/PDOP" on page 101
<subsystem>:GALModulation <Modulation>
Defines the modulation mode used for modulating the galileo carrier signal.
BOC(1,1) modulation can be set with Galileo instead of CBOC(6,1) to reduce the sam-
ple rate required to simulate a certain period of time.
Parameters:
<Modulation>
BOC | CBOC
*RST: 
CBOC
Manual operation: See "Galileo Sat. Modulation" on page 100
<subsystem>:GOConstellation
Retrieves an optimal satellite constellation for the selected Almanac/RINEX file, eleva-
tion mask and the enabled maximum number of satellites.
Usage: 
Event
Manual operation: See "Get Optimal Constellation" on page 102
Satellites Configuration and Satellites Signal Settings
VB.NET PDF Page Delete Library: remove PDF pages in vb.net, ASP.
Add necessary references: RasterEdge.Imaging.Basic.dll. This is a VB .NET example for how to delete a range of pages from a PDF document.
adding pages to a pdf document; add pages to pdf online
C# PDF Page Delete Library: remove PDF pages in C#.net, ASP.NET
options, including setting a single page, a series of pages, and random pages to be C#.NET Project DLLs for Deleting PDF Document Page. Add necessary references
add page numbers to a pdf file; add page numbers to pdf reader
Remote-Control Commands
Satellite Navigation
214
Operating Manual 1173.1427.12 ─ 08
<subsystem>:SATellite:GRTProjection <Glb_RT_proj>
Forces ephemeris projection for all satellites, i.e. performs the same action as the com-
mand <subsystem>:​SVID<ch>:​<GNSS>:​NMESsage:​RTPRojection​.
Parameters:
<Glb_RT_proj>
0 | 1 | OFF | ON
*RST: 
0
Example: 
See example "Configuring the satellite's constellation"
on page 210.
Manual operation: See "Global Ephemeris Real-Time Projection" on page 102
<subsystem>:SATellite:COUNt <SatCount>
Defines the maximum number of satellites that can be simulated. The minimum
allowed number depends on the selected simulation mode (see <subsystem>:​SMODe​
on page 160) .
Configurations with one satellite are allowed only for <subsystem>:​SMODe​STATic.
For <subsystem>:​SMODe​AUTO or USER, four satellites or more are required.
Note: Generating the navigation signal with more than 6 satellites is enabled only for
instruments equipped with option R&S SMBV-K91; more than 12 satellites require
option R&S SMBV-K96.
The number of satellites determines the value range of the suffix for
<subsystem>:SATellite<st> commands.
Parameters:
<SatCount>
integer
Range: 
 to  24
Increment: 1
*RST: 
1
Example: 
See example "Configuring the satellite's constellation"
on page 210.
Options: 
R&S SMBV-K91 (more than 6 satellites)
R&S SMBV-K96 (more than 12 satellites)
Manual operation: See "Maximum Number of Satellites" on page 103
<subsystem>:SATellite<st>:CACRate?
Queries the currently valid values for the chip rate.
Return values: 
<CACRate>
float
Default unit: Hz
Example: 
See example "Configuring the satellite's constellation"
on page 210.
Satellites Configuration and Satellites Signal Settings
VB.NET PDF insert image library: insert images into PDF in vb.net
VB.NET PDF - Add Image to PDF Page in VB.NET. Guide VB.NET Programmers How to Add Images in PDF Document Using XDoc.PDF SDK for VB.NET.
adding page numbers pdf; adding a page to a pdf in reader
C# PDF Password Library: add, remove, edit PDF file password in C#
in C#.NET framework. Support to add password to PDF document online or in C#.NET WinForms for PDF file protection. Able to create a
adding page numbers to a pdf file; adding page numbers in pdf
Remote-Control Commands
Satellite Navigation
215
Operating Manual 1173.1427.12 ─ 08
Usage: 
Query only
Manual operation: See "Resulting Start Chip Rate" on page 109
<subsystem>:SATellite<st>:DSHift <DopplerShift>
Defines the Doppler shift of the simulated signal of the satellite.
Parameters:
<DopplerShift>
float
Range: 
-100.0e3  to  100.0e3
Increment: 0.01
*RST: 
0
Default unit: Hz
Example: 
See example "Configuring the satellite's constellation"
on page 210.
Manual operation: See "Doppler Shift" on page 108
<subsystem>:SATellite<st>:DURation?
Queries the time the satellite's elevation is higher than 2.5, 5, 7.5 or 10° starting at the
first simulation moment of the satellite of interest, as selected with the command
<subsystem>:​SEMask​.
Return values: 
<Duration>
float
Default unit: s
Example: 
See example "Configuring the satellite's constellation"
on page 210.
Usage: 
Query only
Manual operation: See "Duration (Elev. > 2.5/5/7.5/10°)" on page 106
<subsystem>:SATellite<st>:FNUMber <FrequencyNumber>
The command sets or queries the frequency number, depending on the used data
source. The parameter corresponds to the sub-carrier used to modulate the GLONASS
satellite.
Parameters:
<FrequencyNumber> integer
Range: 
-7  to  24
Increment: 1
*RST: 
0
Manual operation: See "Frequency Number" on page 105
Satellites Configuration and Satellites Signal Settings
C# PDF insert image Library: insert images into PDF in C#.net, ASP
Create high resolution PDF file without image quality losing in ASP.NET application. Add multiple images to multipage PDF document in .NET WinForms.
add page number to pdf file; add pdf pages to word document
C# PDF File & Page Process Library SDK for C#.net, ASP.NET, MVC
Document Protect. Password: Set File Permissions. Password: Open Document. Edit Digital Highlight Text. Add Text. Add Text Box. Drawing Markups. PDF Print. Work
add pages to pdf without acrobat; add page numbers to pdf in preview
Remote-Control Commands
Satellite Navigation
216
Operating Manual 1173.1427.12 ─ 08
<subsystem>:SATellite<st>:FREQuency?
Queries the currently valid values for Doppler-shifted carrier frequency.
Return values: 
<Frequency>
float
Default unit: Hz
Example: 
See example "Configuring the satellite's constellation"
on page 210.
Usage: 
Query only
Manual operation: See "Resulting Start Frequency" on page 108
<subsystem>:SATellite<st>:CPHase <Code>
Sets the initial code phase in chips while working in static simulation mode and using
arbitary navigation data source.
Parameters:
<Code>
float
Range: 
 to  20459.99
Increment: 0.01
*RST: 
0
Manual operation: See "Initial Code Phase" on page 107
<subsystem>:SATellite<st>:ICPHase <ICPhase>
Sets the initial carrier phase.
This setting is only available for <subsystem>:​SMODe​STATic. The parameter is
updated automatically for USER and AUTO.
Parameters:
<ICPhase>
float
Range: 
 to  6.28
Increment: 0.01
*RST: 
0
Example: 
See example "Configuring the satellite's constellation"
on page 210.
Manual operation: See "Initial Carrier Phase " on page 108
<subsystem>:SATellite<st>:PCRate?
Queries the currently valid values for the chip rate of the P-code.
Return values: 
<PCRate>
float
Usage: 
Query only
Satellites Configuration and Satellites Signal Settings
Remote-Control Commands
Satellite Navigation
217
Operating Manual 1173.1427.12 ─ 08
Options: 
R&S SMBV-K93
Manual operation: See "Resulting P-Code Chip Rate" on page 109
<subsystem>:SATellite<st>:MODulation <Modulation>
Defines the modulation used for modulating the carrier signal.
Parameters:
<Modulation>
BPSK | CBOC
*RST: 
BPSK
Example: 
See example "Configuring the satellite's constellation"
on page 210.
Manual operation: See "Modulation" on page 106
<subsystem>:SATellite<st>:ORBit <OrbitType>
(enabled for BeiDou satellites only)
For BeiDou satellites, querries the orbit type the corresponding satellite is using.
Parameters:
<OrbitType>
MEO | IGSO | GEO
*RST: 
GEO
Example: 
See example "Configuring the satellite's constellation"
on page 210.
Manual operation: See "Orbit Type" on page 106
<subsystem>:SATellite<st>:PRANge <Pseudorange>
For <subsystem>:​SMODe​ STATic, defines the propagation delay from satellite to
receiver in meters.
Parameters:
<Pseudorange>
float
Range: 
 to  (2.499E6)/1.023E6*SPEED_OF_LIGHT
Increment: 0.001
*RST: 
0
Default unit: m
Example: 
See example "Configuring the satellite's constellation"
on page 210.
Manual operation: See "Pseudorange" on page 107
Satellites Configuration and Satellites Signal Settings
Remote-Control Commands
Satellite Navigation
218
Operating Manual 1173.1427.12 ─ 08
<subsystem>:SATellite<st>:PRBias <PseudorangeBias>
Sets a bias to the pseudorange of a satellite (see also <subsystem>:​
SATellite<st>:​PRANge​ on page 217).
This setting is only available for <subsystem>:​SMODe​AUTO or USER.
Parameters:
<PseudorangeBias> float
Range: 
-1000  to  1000
Increment: 0.001
*RST: 
0
Default unit: m
Example: 
See example "Configuring the satellite's constellation"
on page 210.
Manual operation: See "Pseudorange Bias" on page 107
<subsystem>:SATellite<st>:SCRate?
Queries the standard chip rate.
Return values: 
<ChipRate>
float
Default unit: Hz
Example: 
See example "Configuring the satellite's constellation"
on page 210.
Usage: 
Query only
Manual operation: See "Standard Chip Rate" on page 105
<subsystem>:SATellite<st>:SIGNal <Signal>
Selects the type of signal the corresponding satellite is using.
Enabled <subsystem>:​UMGPs​ is prerequisites for using P codes.
Parameters:
<Signal>
CACode | PCODe | CAPQ | CAPI | E1Def | RCA | B1CA
*RST: 
CACode
Example: 
See example "Configuring the satellite's constellation"
on page 210.
Manual operation: See "Signal(s)" on page 103
<subsystem>:SATellite<st>:STANdard <Standard>
Selects the navigation standard the corresponding satellite belongs to.
Satellites Configuration and Satellites Signal Settings
Remote-Control Commands
Satellite Navigation
219
Operating Manual 1173.1427.12 ─ 08
The available GNSS standards depend on the selected hybrid GNSS configuration and
the installed options.
Parameters:
<Standard>
GPS | GALileo | GLONass | BEIDou
*RST: 
GPS
Example: 
See example "Configuring the satellite's constellation"
on page 210.
Manual operation: See "Standard" on page 103
<subsystem>:SATellite<st>:STATe <State>
Activates/deactivates the satellite.
Parameters:
<State>
0 | 1 | OFF | ON
*RST: 
0
Example: 
See example "Configuring the satellite's constellation"
on page 210.
Manual operation: See "Satellite State" on page 103
<subsystem>:SATellite<st>:SVID <Svid>
Defines the Space Vehicle ID of the satellite to be simulated. This value is used to gen-
erate the corresponding spreading code.
For <subsystem>:​NAVigation:​DATA​RNData, only the valid IDs which are listed in
the almanac are selectable; for arbitrary data, any ID can be selected.
SV ID set to -1 corresponds to the manual selection "N.A. (not assigned)". It is not
allowed to assign the same SV ID to more than one satellite of one GNSS standard.
Hence, the selection N.A. can be used to exchange the assigned SV ID to different sat-
ellites belonging to the same standard.
Parameters:
<Svid>
integer
Range: 
 to  40
Increment: 1
*RST: 
1
Example: 
See example "Configuring the satellite's constellation"
on page 210.
Manual operation: See "SV-ID" on page 104
<subsystem>:SATellite<st>:TSHift <TimeShift>
Defines the propagation delay from satellite to receiver.
Satellites Configuration and Satellites Signal Settings
Remote-Control Commands
Satellite Navigation
220
Operating Manual 1173.1427.12 ─ 08
Parameters:
<TimeShift>
float
time shift in chips
Range: 
 to  2499999.999
Increment: 0.001
*RST: 
0
Example: 
See example "Configuring the satellite's constellation"
on page 210.
Manual operation: See "Time Shift/ chips" on page 108
4.13 Global Signal Configuration
<subsystem>:SVID:SIGNal:COUPling <State>
Enables the configuration of all SV IDs simultaneously. Current settings are overwrit-
ten.
Parameters:
<State>
0 | 1 | OFF | ON
*RST: 
1
Manual operation: See "SV ID Signal Coupling" on page 110
<subsystem>:SVID<ch>:<GNSS>:SIGNal
<subsystem>:SVID<ch>:BEIDou:SIGNal <Signal>
<subsystem>:SVID<ch>:GALileo:SIGNal <Signal>
<subsystem>:SVID<ch>:GLONass:SIGNal <Signal>
<subsystem>:SVID<ch>:GPS:SIGNal <Signal>
Sets the type of signal a SV ID will use in the moment the corresponding satellite
becomes visible.
Parameters:
<Signal>
CACode | PCODe | CAPQ | CAPI | E1Def | RCA | B1CA
GPS signals: CACode|PCODe|CAPQ|CAPI
Galileo signals: E1Def
GLONASS signals: RCA
BeiDou signals: B1CA
*RST: 
CACode
Options: 
R&S SMBV-K93
<subsystem>:SVID<ch>:<GNSS>:POWer
<subsystem>:SVID<ch>:BEIDou:POWer <Power>
<subsystem>:SVID<ch>:GALileo:POWer <Power>
Global Signal Configuration
Documents you may be interested
Documents you may be interested