c# : winform : pdf viewer : Add multi page pdf to word document Library software component .net winforms html mvc RS_SigGen_GNSS_Operating_en_0828-part1431

Remote-Control Commands
Satellite Navigation
281
Operating Manual 1173.1427.12 ─ 08
<Day>
integer
required for TimeBasis = UTC
Range: 
 to  31
Increment: 1
<Hour>
integer
required for TimeBasis = UTC
Range: 
 to  23
Increment: 1
<Minutes>
integer
required for TimeBasis = UTC
Range: 
 to  59
Increment: 1
<Seconds>
float
required for TimeBasis = UTC
Range: 
 to  59.999
Increment: 0.001
<WeekNumber>
integer
required for TimeBasis = GPS|GST|BDT
Range: 
 to  529947
Increment: 1
<TimeOfWeek>
float
required for TimeBasis = GPS|GST|BDT
Range: 
 to  604799.999
Increment: 0.001
Return values: 
<Yaw>
float
Range: 
-3.14  to  3.14
Increment: 0.01
*RST: 
0
<Pitch>
float
Range: 
-3.14  to  3.14
Increment: 0.01
*RST: 
0
<Roll>
float
Range: 
-3.14  to  3.14
Increment: 0.01
*RST: 
0
S.P.O.T Configuration and Real-Time Commands
Add multi page pdf to word document - insert pages into PDF file in C#.net, ASP.NET, MVC, Ajax, WinForms, WPF
Guide C# Users to Insert (Empty) PDF Page or Pages from a Supported File Format
add and delete pages in pdf online; add page pdf
Add multi page pdf to word document - VB.NET PDF Page Insert Library: insert pages into PDF file in vb.net, ASP.NET, MVC, Ajax, WinForms, WPF
Easy to Use VB.NET APIs to Add a New Blank Page to PDF Document
add page to pdf acrobat; add page numbers to pdf document in preview
Remote-Control Commands
Satellite Navigation
282
Operating Manual 1173.1427.12 ─ 08
Example: 
SOURce1:BB:GPS:SMODe AUTO
SOURce1:BB:GPS:RATTitude? GPS,1609,61455
Response: 0.10,0.00,1.00
The current receiver attitude parameters yaw (Y) = 0.1, pitch (P)
= 0 and roll (R) = 1.0
Usage: 
Query only
Manual operation: See "Yaw/Heading, Pitch/Elevation, Roll/Bank" on page 72
4.19 Trigger Settings
<subsystem>[:TRIGger]:SEQuence
.................................................................................282
<subsystem>:TRIGger:SLENgth
......................................................................................282
<subsystem>:TRIGger:RMODe?
.....................................................................................283
<subsystem>:TRIGger:ARM:EXECute
.............................................................................283
<subsystem>:TRIGger:EXECute
.....................................................................................284
<subsystem>:TRIGger:SOURce
......................................................................................284
<subsystem>:TRIGger:EXTernal:SYNChronize:OUTPut
....................................................284
<subsystem>:TRIGger:OUTPut<ch>:DELay
.....................................................................285
<subsystem>:TRIGger:OUTPut<ch>:DELay:MINimum?
.....................................................285
<subsystem>:TRIGger:OUTPut<ch>:DELay:MAXimum?
....................................................285
<subsystem>:TRIGger:OUTPut:DELay:FIXed
...................................................................286
<subsystem>:TRIGger[:EXTernal<ch>]:DELay
..................................................................286
<subsystem>:TRIGger[:EXTernal<ch>]:INHibit
..................................................................286
<subsystem>[:TRIGger]:SEQuence <Sequence>
Selects the trigger mode.
Parameters:
<Sequence>
AUTO | RETRigger | AAUTo | ARETrigger | SINGle
*RST: 
AUTO
Example: 
BB:GPS:SEQ AAUT
sets the "Armed_auto" trigger mode; the device waits for the first
trigger (e.g. with *TRG) and then generates the signal continu-
ously.
Manual operation: See "Trigger Mode" on page 146
<subsystem>:TRIGger:SLENgth <SLength>
Defines the length of the signal sequence to be output in the "Single" trigger mode
(SOUR:BB:GPS:SEQ SING). The unit of the entry is defined under "Signal Duration
Unit". The maximum value for the sequence length depends on the selected unit.
It is possible to output deliberately just part of the signal, an exact sequence of the sig-
nal, or a defined number of repetitions of the signal.
Trigger Settings
C# PDF Convert to Word SDK: Convert PDF to Word library in C#.net
library can help developers convert multi-page PDF document to multi-page Word file or convert each PDF document page to separate Add necessary references:
add page numbers to pdf in preview; add page break to pdf
C# Word - Process Word Document in C#
With our C#.NET Word control, developers are able to split a multi-page Word document into two sub-documents. C#.NET: Add & Insert Word Page.
add page number to pdf online; add page numbers to a pdf file
Remote-Control Commands
Satellite Navigation
283
Operating Manual 1173.1427.12 ─ 08
Parameters:
<SLength>
integer
Range: 
 to  4294967295
Increment: 1
*RST: 
1023
Example: 
BB:GPS:SEQ SING
sets trigger mode Single.
BB:GPS:TRIG:SLEN 200
sets a sequence length of 200 chips. The first 200 chips of the
current frame will be output after the next trigger event.
Manual operation: See "Signal Duration" on page 147
<subsystem>:TRIGger:RMODe?
Queries the current status of signal generation for all trigger modes with GPS modula-
tion on.
Return values: 
<RMode>
STOP | RUN
*RST: 
STOP
Example: 
BB:GPS:TRIG:MODE ARET
selects the "Armed_Retrigger" mode.
BB:GPS:TRIG:SOUR EXT
sets external triggering via the TRIGGER 1 connector.
BB:GPS:TRIG:RMOD?
queries the current status of signal generation.
Response: RUN
the signal is generated, an external trigger was executed.
Usage: 
Query only
Manual operation: See "Running/Stopped" on page 147
<subsystem>:TRIGger:ARM:EXECute
Stops signal generation for trigger modes "Armed_Auto" and "Armed_Retrigger". A
subsequent internal or external trigger event restarts signal generation.
Example: 
BB:GPS:TRIG:SOUR INT
sets internal triggering.
BB:GPS:TRIG:SEQ ARET
sets Armed_Retrigger mode, i.e. every trigger event causes sig-
nal generation to restart.
BB:GPS:TRIG:EXEC
executes a trigger, signal generation is started.
BB:GPS:TRIG:ARM:EXEC
signal generation is stopped.
BB:GPS:TRIG:EXEC
executes a trigger, signal generation is started again.
Trigger Settings
C# PDF File & Page Process Library SDK for C#.net, ASP.NET, MVC
Highlight Text. Add Text. Add Text Box. Drawing to, VB.NET PDF, VB.NET Word, VB.NET Easily manipulate multi-page PDF document file with page inserting, deleting
adding page numbers to pdf in preview; add pdf pages to word document
C# PDF Converter Library SDK to convert PDF to other file formats
document conversion in .NET framework using C# programming language. Support to convert PDF to Microsoft Word in C#.NET class. Support to convert multi-page PDF
add page number to pdf in preview; add and remove pages from a pdf
Remote-Control Commands
Satellite Navigation
284
Operating Manual 1173.1427.12 ─ 08
Usage: 
Event
Manual operation: See "Arm" on page 62
<subsystem>:TRIGger:EXECute
Executes a trigger. The internal trigger source must be selected using the command
<subsystem>:TRIG:SOUR INT and a trigger mode other than AUTO must be
selected using the command <subsystem>:TRIG:SEQ.
Example: 
BB:GPS:TRIG:SOUR INT
sets internal triggering.
BB:GPS:TRIG:SEQ ARET
sets "Armed_Retrigger" mode, i.e. every trigger event causes
signal generation to restart.
BB:GPS:TRIG:EXEC
executes a trigger, signal generation is started.
BB:GPS:TRIG:ARM:EXEC
signal generation is stopped.
BB:GPS:TRIG:EXEC
executes a trigger, signal generation is started again.
Usage: 
Event
Manual operation: See "Execute Trigger" on page 62
<subsystem>:TRIGger:SOURce <Source>
Selects the trigger source.
Parameters:
<Source>
INTernal | EXTernal
Example: 
BB:GPS:TRIG:SING
selects a trigger mode that requires a trigger.
BB:GPS:TRIG:SOUR EXT
sets external triggering via the TRIGGER connector.
Manual operation: See "Trigger Source" on page 148
<subsystem>:TRIGger:EXTernal:SYNChronize:OUTPut <Output>
(enabled for "Trigger Source" External)
Enables/disables output of the signal synchronous to the external trigger event.
Parameters:
<Output>
0 | 1 | OFF | ON
*RST: 
1
Trigger Settings
VB.NET Image: Multi-page TIFF Editor SDK; Process TIFF in VB.NET
are interested in one of those mature multi-page TIFF processing & Save TIFF in VB.NET, VB.NET TIFF Page Processing. VB.NET TIFF Annotation Library Add-on, VB.NET
adding page numbers to pdf; adding page numbers in pdf
VB.NET Word: .NET Word Reader & Processor Control SDK | Online
If you are processing multi-page Word documents (especially for This VB.NET Word page processing control is can help developers to draw & add industry standard
add and delete pages in pdf online; add pages to pdf without acrobat
Remote-Control Commands
Satellite Navigation
285
Operating Manual 1173.1427.12 ─ 08
Example: 
BB:GPS:TRIG:SOUR EXT
sets external triggering.
BB:GPS:TRIG:EXT:SYNC:OUTP ON
enables synchrounous output to external trigger.
Manual operation: See "Sync. Output to External Trigger" on page 148
<subsystem>:TRIGger:OUTPut<ch>:DELay <Delay>
Defines the delay between the signal on the marker outputs and the start of the signal,
expressed in terms of chips. Command :BB:GPS:TRIGger:OUTPut:DELay:FIXed
can be used to restrict the range of values to the dynamic range, i.e. the range within
which a delay of the marker signals can be set without restarting the marker and sig-
nal.
Parameters:
<Delay>
float
Range: 
 to  2^32 - 1 chips
Increment: 1 chip
*RST: 
0
Example: 
BB:GPS:TRIG:OUTP2:DEL 1600
sets a delay of 1600 chips for the signal on connector MARKER
2.
Manual operation: See "Marker x Delay" on page 151
<subsystem>:TRIGger:OUTPut<ch>:DELay:MINimum?
<subsystem>:TRIGger:OUTPut<ch>:DELay:MAXimum?
Queries the maximum marker delay for setting <subsystem>:TRIG:OUTP:DEL:FIX
ON.
Return values: 
<Maximum>
float
Range: 
 to  max
Example: 
BB:GPS:TRIG:OUTP:DEL:FIX ON
restricts the marker signal delay setting range to the dynamic
range.
BB:GPS:TRIG:OUTP:DEL:MAX?
queries the maximum of the dynamic range.
Response: 2000
the maximum for the marker delay setting is 2000 chips.
Usage: 
Query only
Manual operation: See "Current Range without Recalculation" on page 151
Trigger Settings
C# TIFF: C# Code for Multi-page TIFF Processing Using RasterEdge .
and save various image and document file formats Jpeg, Bmp, Png, Gif, PDF, Word, Excel, PowerPoint com aims at developing professional multi-page Tiff processing
add pages to pdf acrobat; add blank page to pdf
C# PDF Page Rotate Library: rotate PDF page permanently in C#.net
page rotating SDK is, in essence, a multi-functional PDF Besides the functionality to rotate PDF document page, it is also PDF files using C# .NET, add new PDF
add a page to a pdf in reader; add document to pdf pages
Remote-Control Commands
Satellite Navigation
286
Operating Manual 1173.1427.12 ─ 08
<subsystem>:TRIGger:OUTPut:DELay:FIXed <Fixed>
Restricts the marker delay setting range to the dynamic range. In this range the delay
can be set without restarting the marker and signal. If a delay is entered in setting ON
but is outside this range, the maximum possible delay is set and an error message is
generated.
Parameters:
<Fixed>
0 | 1 | OFF | ON
*RST: 
0
Example: 
BB:GPS:TRIG:OUTP:DEL:FIX ON
restricts the marker signal delay setting range to the dynamic
range.
Manual operation: See "Fix marker delay to current range" on page 151
<subsystem>:TRIGger[:EXTernal<ch>]:DELay <Delay>
Specifies the trigger delay (expressed as a number of chips) for external triggering.
Parameters:
<Delay>
float
Range: 
 to  65535
Increment: 0.01 chip
*RST: 
0.0 chips
Example: 
BB:GPS:TRIG:SOUR EXT
sets an external trigger via the TRIGGER 1 connector.
BB:GPS:TRIG:DEL 50
sets a delay of 50 chips for the trigger.
Manual operation: See "External Delay" on page 149
<subsystem>:TRIGger[:EXTernal<ch>]:INHibit <Inhibit>
Specifies the number of chips by which a restart is to be inhibited following a trigger
event. Applies only in the case of external triggering.
Parameters:
<Inhibit>
integer
Range: 
 to  67108863
Increment: 1 chip
*RST: 
0
Example: 
BB:GPS:TRIG:SOUR EXT
selects an external trigger via the TRIGGER 1 connector.
BB:GPS:TRIG:INH 200
sets a restart inhibit for 200 chips following a trigger event.
Manual operation: See "External Inhibit" on page 149
Trigger Settings
C# HTML5 Viewer: Load, View, Convert, Annotate and Edit Word
can convert Convert Microsoft Office Word to searchable PDF online, create multi-page Tiff file Users are empowered to add annotations to Word, such as
add a page to a pdf file; adding a page to a pdf file
C# Word - Convert Word to PDF in C#.NET
Word to PDF conversion library can help developers convert multi-page Word document to multi-page PDF file. C# Demo: Convert Word to PDF Document. Add references
add page numbers to pdf preview; add page number to pdf hyperlink
Remote-Control Commands
Satellite Navigation
287
Operating Manual 1173.1427.12 ─ 08
4.20 Marker Settings
<subsystem>:TRIGger:OUTPut<ch>:MODE
.....................................................................287
<subsystem>:TRIGger:OUTPut<ch>:ONTime
...................................................................288
<subsystem>:TRIGger:OUTPut<ch>:OFFTime
.................................................................288
<subsystem>:TRIGger:OUTPut<ch>:PATTern
..................................................................288
<subsystem>:TRIGger:OUTPut<ch>:PULSe:DIVider
.........................................................288
<subsystem>:TRIGger:OUTPut<ch>:PULSe:FREQuency?
................................................289
<subsystem>:TRIGger:OUTPut<ch>:PULSe:WIDTh
..........................................................289
<subsystem>:TRIGger:OUTPut<ch>:MODE <Mode>
Defines the signal for the selected marker output.
Note: In instruments equipped with option R&S SMBV-K96, disabled <subsystem>:​
UMGPs​ and enabled satellites constellation with more than 12 satellites, only one
marker signal is available.
Parameters:
<Mode>
PULSe | PATTern | RATio | PPS | PP2S | TRIGger | DISabled |
PPS10 | | RESTart
PULSe|PATTern|RATio
Reqular marker signals
PPS | PP2S | PPS10
A marker signal is generated for every start of second, every
second second or respectivelly every tenth second (GPS time).
The pulse width is defined with the
<subsystem>:TRIG:OUTP:PULSe:WIDTh command
TRIGger
A marker signal is generated only when a trigger event occurs.
DISabled
Generation of a marker signal is deactivated.
Restart
(R&S WinIQSIM2 only)
The signal is generated continuously. A trigger event causes a
restart.
*RST: 
PPS
Example: 
BB:GPS:TRIG:OUTP2:PATT #B000000011111111,15
sets a bit pattern.
BB:GPS:TRIG:OUTP1:MODE PATT
activates the marker signal according to a bit pattern on output
MARKER 1.
Manual operation: See "Marker Mode" on page 150
Marker Settings
Remote-Control Commands
Satellite Navigation
288
Operating Manual 1173.1427.12 ─ 08
<subsystem>:TRIGger:OUTPut<ch>:ONTime <OnTime>
<subsystem>:TRIGger:OUTPut<ch>:OFFTime <OffTime>
Sets the number of chips in a period (ON time + OFF time) during which the marker
signal in setting <subsystem>:TRIGger:OUTPut:MODE RATio on the marker out-
puts is OFF.
Parameters:
<OffTime>
integer
Range: 
 to  2^24 - 1 chips
Increment: 1 chip
*RST: 
1
Example: 
BB:GPS:TRIG:OUTP2:OFFT 200
sets an OFF time of 200 chips for marker signal 2.
Manual operation: See "Marker Mode" on page 150
<subsystem>:TRIGger:OUTPut<ch>:PATTern <Pattern>
Defines the bit pattern used to generate the marker signal in the setting
<subsystem>:TRIGger:OUTPut:MODE PATTern. 0 is marker off, 1 is marker on.
Parameters:
<Pattern>
64 bit pattern
Range: 
#B0,1  to  #B111...1,64
*RST: 
#B0,1
Example: 
BB:GPS:TRIG:OUTP2:PATT #B000000011111111,15
sets a bit pattern.
BB:GPS:TRIG:OUTP2:MODE PATT
activates the marker signal according to a bit pattern on output
MARKER 2.
Manual operation: See "Marker Mode" on page 150
<subsystem>:TRIGger:OUTPut<ch>:PULSe:DIVider <Divider>
Sets the divider for Pulse marker mode (<subsystem>:TRIG:OUTP:MODE PULSe).
The resulting pulse frequency is derived by dividing the chip rate (1.023 MHz) by the
divider.
Parameters:
<Divider>
integer
Range: 
 to  1024
Increment: 1
*RST: 
2
Marker Settings
Remote-Control Commands
Satellite Navigation
289
Operating Manual 1173.1427.12 ─ 08
Example: 
BB:GPS:TRIG:OUTP2:PULS:DIV 2
sets the divider to 2 for the marker signal on output MARKER 2.
BB:GPS:TRIG:OUTP2:FREQ?
queries the resulting pulse frequency of the marker signal.
Response: 511511.038
the resulting pulse frequency is 511.511 kHz.
Manual operation: See "Marker Mode" on page 150
<subsystem>:TRIGger:OUTPut<ch>:PULSe:FREQuency?
Queries the pulse frequency of the pulsed marker signal in the setting
<subsystem>:TRIGger:OUTPut:MODE PULSe. The pulse frequency is derived by
dividing the symbol rate by the divider.
Return values: 
<Frequency>
float
Example: 
BB:GPS:TRIG:OUTP2:PULS:DIV 2
sets the divider for the marker signal on output MARKER 2 to
the value 2.
BB:GPS:TRIG:OUTP2:MODE PULS
enables the pulsed marker signal.
BB:GPS:TRIG:OUTP2:PULS:FREQ?
queries the pulse frequency of the marker signal.
Response: 511511.038
the resulting pulse frequency is 511.511 kHz.
Usage: 
Query only
Manual operation: See "Marker Mode" on page 150
<subsystem>:TRIGger:OUTPut<ch>:PULSe:WIDTh <Width>
Sets the Pulse Width for 1PPS and 1PP2S marker mode
(<subsystem>:TRIG:OUTP:MODE PPS | PP2S).
Parameters:
<Width>
integer
Range: 
 to  800
*RST: 
1
Example: 
BB:GPS:TRIG:OUTP2:MODE PPS
enables the 1PPS marker signal.
BB:GPS:TRIG:OUTP1:PULS:WIDT 2
sets the pulse width for the marker signal on output MARKER 2
to the value 2.
Manual operation: See "Marker Mode" on page 150
Marker Settings
Remote-Control Commands
Satellite Navigation
290
Operating Manual 1173.1427.12 ─ 08
4.21 Clock Settings
<subsystem>:CLOCk:MODE
...........................................................................................290
<subsystem>:CLOCk:MULTiplier
.....................................................................................290
<subsystem>:CLOCk:SOURce
........................................................................................290
<subsystem>:CLOCk:SYNChronization:EXECute
.............................................................291
<subsystem>:CLOCk:SYNChronization:MODE
.................................................................291
<subsystem>:CLOCk:MODE <Mode>
Enters the type of externally supplied clock (<subsystem>:CLOCk:SOURce
EXTernal).
When MCHip is used, a multiple of the chip clock is supplied via the CLOCK connector
and the chip clock is derived internally from this. The multiplier is entered with the com-
mand <subsystem>:CLOCk:MULTiplier.
Parameters:
<Mode>
CHIP | MCHip
*RST: 
CHIP
Example: 
BB:GPS:CLOC:MODE CHIP
selects clock type "Chip", i.e. the supplied clock is a chip clock.
Manual operation: See "Clock Mode" on page 152
<subsystem>:CLOCk:MULTiplier <Multiplier>
Specifies the multiplier for clock type "Multiplied" (<subsystem>:CLOCk:MODE
MCHip) in the case of an external clock source.
Parameters:
<Multiplier>
integer
Range: 
 to  64
Increment: 1
*RST: 
4
Example: 
BB:GPS:CLOC:SOUR EXT
selects the external clock source. The clock is supplied via the
CLOCK connector.
BB:GPS:CLOC:MODE MCH
selects clock type "Multiplied", i.e. the supplied clock has a rate
which is a multiple of the chip rate.
BB:GPS:CLOC:MULT 12
the multiplier for the external clock rate is 12.
Manual operation: See "Clock Multiplier" on page 153
<subsystem>:CLOCk:SOURce <Source>
Selects the clock source.
Clock Settings
Documents you may be interested
Documents you may be interested