c# : winform : pdf viewer : Add page numbers to pdf files SDK Library project winforms .net web page UWP RS_SigGen_NFC_A_B_F_Operating_en_059-part1453

Remote-Control Commands
NFC A/B/F
91
Operating Manual 1175.7268.02 ─ 05
Parameters:
<MTr1>
TR10 | TR11 | TR12
Manual operation: See "Minimum TR0, TR1, TR2" on page 42
[:SOURce<hw>]:BB:NFC:CBLock<ch>:MTR2 <MTr2>
Sets the minimum value of TR2 supported.
Parameters:
<MTr2>
TR20 | TR21 | TR22 | TR23
Manual operation: See "Minimum TR0, TR1, TR2" on page 42
[:SOURce<hw>]:BB:NFC:CBLock<ch>:N2FType <NFType>
Determines which protocol or platform the NFCID2 format is for.
Parameters:
<NFType>
NDEP | TT3
Manual operation: See "NFCID2 Format Type" on page 44
[:SOURce<hw>]:BB:NFC:CBLock<ch>:NACK <Nack>
Determines the value of NACK.
Parameters:
<Nack>
NCK1 | NCK0 | NCK4 | NCK5
Manual operation: See "NACK" on page 42
[:SOURce<hw>]:BB:NFC:CBLock<ch>:NAD <Nad>
Determines the value of NAD.
Parameters:
<Nad>
integer
Manual operation: See "NAD" on page 43
[:SOURce<hw>]:BB:NFC:CBLock<ch>:NBLocks <NBlock>
Determines the number of blocks.
Parameters:
<NBlock>
float
*RST: 
1
Manual operation: See "Number of Blocks" on page 44
Frame Configuration
Add page numbers to pdf files - insert pages into PDF file in C#.net, ASP.NET, MVC, Ajax, WinForms, WPF
Guide C# Users to Insert (Empty) PDF Page or Pages from a Supported File Format
add page numbers pdf; adding page numbers to pdf document
Add page numbers to pdf files - VB.NET PDF Page Insert Library: insert pages into PDF file in vb.net, ASP.NET, MVC, Ajax, WinForms, WPF
Easy to Use VB.NET APIs to Add a New Blank Page to PDF Document
adding pages to a pdf; add and delete pages in pdf
Remote-Control Commands
NFC A/B/F
92
Operating Manual 1175.7268.02 ─ 05
[:SOURce<hw>]:BB:NFC:CBLock<ch>:NFOLlowing <NFollowing>
Determines if NAD is following.
Parameters:
<NFollowing>
0 | 1 | OFF | ON
Manual operation: See "NAD following" on page 43
[:SOURce<hw>]:BB:NFC:CBLock<ch>:NID0 <Nfcid0>
Determines the entire value of NFCID0.
Parameters:
<Nfcid0>
integer
Manual operation: See "NFCID0 (hex) / PUPI (hex)" on page 43
[:SOURce<hw>]:BB:NFC:CBLock<ch>:NID1 <Nfcid1>
Determines the entire value of NFCID1.
Parameters:
<Nfcid1>
integer
Manual operation: See "NFCID1 (hex) / UID (hex)" on page 43
[:SOURce<hw>]:BB:NFC:CBLock<ch>:NID2 <Nfcid2>
Determines the entire value of NFCID2. Is a virtual parameter for SCPI to set the
NFCID2 either in NFC-DEP or Type 3 Tag mode.
Parameters:
<Nfcid2>
integer
Manual operation: See "NFCID2 (hex)" on page 44
[:SOURce<hw>]:BB:NFC:CBLock<ch>:NNComplete <Nfcid1NotCom>
Determines whether NFCID1 is complete or not.
Parameters:
<Nfcid1NotCom>
0 | 1 | OFF | ON
Manual operation: See "NFCID1 not complete / UID not complete" on page 43
[:SOURce<hw>]:BB:NFC:CBLock<ch>:NOAPplications <NOApplication>
Determines the number of applications.
Parameters:
<NOApplication>
float
*RST: 
1
Frame Configuration
C# Create PDF Library SDK to convert PDF from other file formats
them the ability to count the page numbers of generated metadata adding control, you can add some additional Create PDF Document from Existing Files Using C#.
add page number to pdf; adding page numbers pdf file
C# Word - Word Create or Build in C#.NET
also offer them the ability to count the page numbers of generated using this Word document adding control, you can add some additional Create Word From PDF.
add pages to pdf without acrobat; add a page to a pdf in acrobat
Remote-Control Commands
NFC A/B/F
93
Operating Manual 1175.7268.02 ─ 05
Manual operation: See "Number of Applications" on page 44
[:SOURce<hw>]:BB:NFC:CBLock<ch>:NOSLots <NOSlots>
Determines the number of slots.
Parameters:
<NOSlots>
S1 | S2 | S4 | S8 | S16
Manual operation: See "Number of Slots" on page 45
[:SOURce<hw>]:BB:NFC:CBLock<ch>:NSERvices <NService>
Sets the number of services.
Parameters:
<NService>
float
*RST: 
1
Manual operation: See "Number of Services" on page 45
[:SOURce<hw>]:BB:NFC:CBLock<ch>:NSIZe <Nfcid1sz>
Determines the size of NFCID1.
Parameters:
<Nfcid1sz>
SINGle | DOUBle | TRIPle
Manual operation: See "NFCID1 Size / UID Size" on page 43
[:SOURce<hw>]:BB:NFC:CBLock<ch>:NSUPported <NSupport>
Determines if NAD is supported.
Parameters:
<NSupport>
0 | 1 | OFF | ON
Manual operation: See "NAD Supported" on page 43
[:SOURce<hw>]:BB:NFC:CBLock<ch>:PAD0 <Pad0>
[:SOURce<hw>]:BB:NFC:CBLock<ch>:PAD1 <Pad1>
[:SOURce<hw>]:BB:NFC:CBLock<ch>:PAD2 <Pad2>
Sets the value of PAD0/PAD1/PAD2 (hex).
Parameters:
<Pad2>
integer
Manual operation: See "PAD0, PAD1, PAD2" on page 46
Frame Configuration
C# PowerPoint - PowerPoint Creating in C#.NET
New PowerPoint File and Load PowerPoint from Other Files. them the ability to count the page numbers of generated creating toolkit, if you need to add some text
adding page numbers in pdf; adding page to pdf in preview
C# Word - Word Creating in C#.NET
to Create New Word File and Load Word from Other Files. them the ability to count the page numbers of generated creating toolkit, if you need to add some text
add page number to pdf in preview; add page numbers to pdf in preview
Remote-Control Commands
NFC A/B/F
94
Operating Manual 1175.7268.02 ─ 05
[:SOURce<hw>]:BB:NFC:CBLock<ch>:PDUType <PDUType>
Selects the type of PDU.
Parameters:
<PDUType>
INFO | ANACk | SUPer
Manual operation: See "PDU Type" on page 46
[:SOURce<hw>]:BB:NFC:CBLock<ch>:PLIN <PLIndication>
Only used when DESELCT/WTX is set to WTX. Determines Power Level Indication.
Parameters:
<PLIndication>
float
*RST: 
0
Manual operation: See "Power Level Indication" on page 46
[:SOURce<hw>]:BB:NFC:CBLock<ch>:PLIR <PLIndicator>
Sets the Power Level Indicator.
Parameters:
<PLIndicator>
float
*RST: 
0
Manual operation: See "Power Level Indicator" on page 46
[:SOURce<hw>]:BB:NFC:CBLock<ch>:PNI <Pni>
Only used with PDU type Information. Determines Packet Number Information (PNI).
Parameters:
<Pni>
float
Manual operation: See "PNI" on page 46
[:SOURce<hw>]:BB:NFC:CBLock<ch>:PSELection <PSelection>
Selects if the first or second packet of the SECTOR_SELECT command is transmitted.
Parameters:
<PSelection>
PCK1 | PCK2
Manual operation: See "Packet Selection" on page 46
[:SOURce<hw>]:BB:NFC:CBLock<ch>:PUPI <PUPI>
Determines the entire value of PUPI.
Parameters:
<PUPI>
integer
Frame Configuration
C# Excel - Excel Creating in C#.NET
to Create New Excel File and Load Excel from Other Files. them the ability to count the page numbers of generated creating toolkit, if you need to add some text
adding pages to a pdf document in preview; add multi page pdf to word document
VB.NET TIFF: VB.NET Sample Codes to Sort TIFF File with .NET
to sort a multi-page TIFF file with page numbers using VB define the orders for the TIFF file page sorting by pageCount - 1 To 0 Step -1 newOrders.Add(i) Next
add blank page to pdf; add page numbers to a pdf document
Remote-Control Commands
NFC A/B/F
95
Operating Manual 1175.7268.02 ─ 05
Manual operation: See "NFCID0 (hex) / PUPI (hex)" on page 43
[:SOURce<hw>]:BB:NFC:CBLock<ch>:RC <Rc>
Indicates the Request Code (RC).
Parameters:
<Rc>
NSCI | SCIR | APFS
Manual operation: See "RC" on page 47
[:SOURce<hw>]:BB:NFC:CBLock<ch>:RTOX <Rtox>
Determines the response timeout extension request value (RTOX).
Parameters:
<Rtox>
float
*RST: 
1
Manual operation: See "RTOX" on page 47
[:SOURce<hw>]:BB:NFC:CBLock<ch>:SCMD <SCmd>
Selects the cascade level (CL) of the NFCID1 requested by the NFC Forum Device in
Poll Mode.
Parameters:
<SCmd>
CL1 | CL2 | CL3
Manual operation: See "SEL_CMD / SEL" on page 47
[:SOURce<hw>]:BB:NFC:CBLock<ch>:SCODe <SCode>
Sets the System Code.
Parameters:
<SCode>
integer
*RST: 
#Hffff
Manual operation: See "SC" on page 47
[:SOURce<hw>]:BB:NFC:CBLock<ch>:SEGSelection <SegmentSel>
Selects a segment to be read.
Parameters:
<SegmentSel>
float
*RST: 
1
Manual operation: See "Segment Selection (ADD)" on page 47
Frame Configuration
C#: Use XImage.OCR to Recognize MICR E-13B, OCR-A, OCR-B Fonts
may need to scan and get check characters like numbers and codes. page.RecSettings. LanguagesEnabled.Add(Language.Other); page.RecSettings.OtherLanguage
add page numbers to a pdf in preview; add document to pdf pages
VB.NET Excel: VB Methods to Set and Customize Excel Rendering
treat every single Excel spreadsheet as a page in our An image consists of large numbers of dots, and the Our Excel converting add-on for VB.NET still supports
add a blank page to a pdf; add page to pdf
Remote-Control Commands
NFC A/B/F
96
Operating Manual 1175.7268.02 ─ 05
[:SOURce<hw>]:BB:NFC:CBLock<ch>:SEL <SELect>
Selects the cascade level (CL) of the UID.
Parameters:
<SELect>
CL1 | CL2 | CL3
Manual operation: See "SEL_CMD / SEL" on page 47
[:SOURce<hw>]:BB:NFC:CBLock<ch>:SENRequired <SENRequired>
Determines whether a suppression of EoS (End of Sequence)/SoS (Start of Sequence)
is required or not.
Parameters:
<SENRequired>
0 | 1 | OFF | ON
Manual operation: See "Suppression of EoS,SoS Not Required" on page 49
[:SOURce<hw>]:BB:NFC:CBLock<ch>:SERVice<st>:AATTributes <AAttributes>
Enables the Service Code List Configuration.
Parameters:
<AAttributes>
AARW | AARO
Manual operation: See "Service Code List..." on page 48
[:SOURce<hw>]:BB:NFC:CBLock<ch>:SERVice<st>:SNUMber <SNumber>
Determines the number of services.
Parameters:
<SNumber>
float
*RST: 
0.0
Manual operation: See "Service Code List..." on page 48
[:SOURce<hw>]:BB:NFC:CBLock<ch>:SF1 <SFlag1>
Sets the status flag 1 to specify a Type 3 tag's error condition. A value of 0 signals a
successful execution, values different from 0 indicate errors.
Parameters:
<SFlag1>
integer
Manual operation: See "Status Flag 1, Status Flag 2" on page 49
[:SOURce<hw>]:BB:NFC:CBLock<ch>:SF2 <SFlag2>
Sets the status flag 2 to specify a Type 3 tag's error condition. A value of 0 signals a
successful execution, values different from 0 indicate errors.
Frame Configuration
C# Excel: Create and Draw Linear and 2D Barcodes on Excel Page
barcode image to the first page page.AddImage(barcodeImage C#.NET Excel Barcode Creating Add-on imaging controls, PDF document, image to pdf files and components
adding a page to a pdf; add page numbers to pdf in reader
VB.NET Image: Guide to Convert Images to Stream with DocImage SDK
Follow this guiding page to learn how to easily convert a single image or numbers of it an image processing component which can enable developers to add a wide
add page numbers to pdf preview; add page numbers to pdf document in preview
Remote-Control Commands
NFC A/B/F
97
Operating Manual 1175.7268.02 ─ 05
Parameters:
<SFlag2>
integer
Manual operation: See "Status Flag 1, Status Flag 2" on page 49
[:SOURce<hw>]:BB:NFC:CBLock<ch>:SFGI <Sfgi>
Determines the Start-up Frame Guard Time (SFGT).
Parameters:
<Sfgi>
float
*RST: 
0
Manual operation: See "SFGI" on page 48
[:SOURce<hw>]:BB:NFC:CBLock<ch>:SNO <SNO>
Only available when packet selection is set to Packet2. Determines the sector number.
Parameters:
<SNO>
float
Manual operation: See "SNo" on page 49
[:SOURce<hw>]:BB:NFC:CBLock<ch>:SNUMber <SNumber>
Determines the slot number.
Parameters:
<SNumber>
SN2 | SN3 | SN4 | SN5 | SN6 | SN7 | SN8 | SN9 | SN10 | SN11 |
SN12 | SN13 | SN14 | SN15 | SN16
Manual operation: See "Slot Number" on page 49
[:SOURce<hw>]:BB:NFC:CBLock<ch>:SPLower <SPLower>
Determines the bit count.
Parameters:
<SPLower>
float
*RST: 
0
Manual operation: See "SEL_PAR_LOWER" on page 48
[:SOURce<hw>]:BB:NFC:CBLock<ch>:SPUPper <SPUpper>
SEL_PAR_UPPER determines the number of full bytes of the SDD_REQ part.
Parameters:
<SPUpper>
float
*RST: 
2
Frame Configuration
Remote-Control Commands
NFC A/B/F
98
Operating Manual 1175.7268.02 ─ 05
Manual operation: See "SEL_PAR_UPPER" on page 47
[:SOURce<hw>]:BB:NFC:CBLock<ch>:SSNRequired <SSNRequired>
Determines whether a suppression of EoS (End of Sequence)/SoS (Start of Sequence)
is required or not.
Parameters:
<SSNRequired>
0 | 1 | OFF | ON
Manual operation: See "Suppression of EoS,SoS Not Required" on page 49
[:SOURce<hw>]:BB:NFC:CBLock<ch>:T1TConfigured <T1TPConfigured>
Determines whether Type 1 Tag platform is configured or not.
Parameters:
<T1TPConfigured>
0 | 1 | OFF | ON
Manual operation: See "Type 1 Tag Platform Configured" on page 49
[:SOURce<hw>]:BB:NFC:CBLock<ch>:T1TK <T1totk>
For number of historical bytes k greater than 0: sets the historical bytes T1 to Tk.
Parameters:
<T1totk>
integer
Manual operation: See "T1 to Tk" on page 49
[:SOURce<hw>]:BB:NFC:CBLock<ch>:TAIPicc <TNAIPicc>
Sets the total number of applications in the PICC (Proximity Inductive Coupling Card),
i.e. in the NFC Forum Device in listener mode.
Parameters:
<TNAIPicc>
float
Manual operation: See "Total No. Apps in the PICC" on page 49
[:SOURce<hw>]:BB:NFC:CBLock<ch>:TSN <Tsn>
Indicates the TSN (Time Slot Number).
Parameters:
<Tsn>
TSN1 | TSN2 | TSN4 | TSN8 | TSN16
Manual operation: See "Number of Time Slots" on page 45
[:SOURce<hw>]:BB:NFC:CBLock<ch>:UID <UID>
Determines the entire value of UID.
Frame Configuration
Remote-Control Commands
NFC A/B/F
99
Operating Manual 1175.7268.02 ─ 05
Parameters:
<UID>
integer
Manual operation: See "NFCID1 (hex) / UID (hex)" on page 43
[:SOURce<hw>]:BB:NFC:CBLock<ch>:UNComplete <UIDNotCom>
Determines whether UID is complete or not.
Parameters:
<UIDCom>
0 | 1 | OFF | ON
Manual operation: See "NFCID1 not complete / UID not complete" on page 43
[:SOURce<hw>]:BB:NFC:CBLock<ch>:USIZe <UIDsz>
Determines the size of UID.
Parameters:
<UIDsz>
SINGle | DOUBle | TRIPle
Manual operation: See "NFCID1 Size / UID Size" on page 43
[:SOURce<hw>]:BB:NFC:CBLock<ch>:WT <Wt>
Sets the Waiting Time (WT) that codes the Response Waiting Time (RWT).
Parameters:
<Wt>
float
*RST: 
1
Manual operation: See "WT" on page 50
[:SOURce<hw>]:BB:NFC:CBLock<ch>:WTXM <Wtxm>
Determines the WTXM. - Only used when DESELCT/WTX is set to WTX.
Parameters:
<Wtxm>
float
*RST: 
1
Manual operation: See "WTXM (INF field of S(WTX) request, response) "
on page 50
6.7 Modulation Settings
[:SOURce<hw>]:BB:NFC:MSET:BOUTput <BOutput>
When activated the signal at the baseband output changes between 0% and 100%
voltage to be able to control the Reference Listeners.
Modulation Settings
Remote-Control Commands
NFC A/B/F
100
Operating Manual 1175.7268.02 ─ 05
Parameters:
<BOutput>
0 | 1 | OFF | ON
Manual operation: See "Baseband Output" on page 26
[:SOURce<hw>]:BB:NFC:MSET:BRATe?
Returns the resulting bitrate for the current settings.
Return values: 
<BRate>
float
Usage: 
Query only
Manual operation: See "Bit Rate" on page 23
[:SOURce<hw>]:BB:NFC:MSET:SLOPe <ESlope>
Determines the transition between the modulated and unmodulated parts (Edge/
Slope).
Parameters:
<ESlope>
0 | 1 | OFF | ON
Manual operation: See "Slope" on page 23
[:SOURce<hw>]:BB:NFC:MSET:IMODulation <IModulation>
When selected, inverse modulation will be used.
Parameters:
<IModulation>
0 | 1 | OFF | ON
Manual operation: See "Inverse Modulation" on page 26
[:SOURce<hw>]:BB:NFC:MSET:MDEPth <MDepth>
Sets the modulation depth in %.
Parameters:
<MDepth>
float
*RST: 
100
Manual operation: See "Modulation Depth" on page 25
[:SOURce<hw>]:BB:NFC:MSET:MINDex <MIndex>
Defines the signal's modulation index in %.
Parameters:
<MIndex>
float
Manual operation: See "Modulation index" on page 25
Modulation Settings
Documents you may be interested
Documents you may be interested