Configuration tasks in the SIMATIC Manager configuration dialog
7.5 Step 3 - Configuration of the WinCC stations
Configuration guidelines SIMATIC BATCH for WinCC
Programming and Operating Manual, 05/2013, A5E02829586-03
Step 2 of the plant editor has been fully completed without error.
Simatic Batch Server: If you select the check box, the BATCH component "SBS" will be
deactivated. Communication between SIMATIC BATCH and the Historian is then not
possible. This is the default setting. If the check box is not selected, the SBS is activated
and communication is possible.
Batch data management (CDV): If you select the check box, the BATCH component
"CDV" will be deactivated. This is the default setting of the option. This means that no
BATCH messages and no tag archive data will be collected. This setting is not changed
over in running operation. Restart the CDV server application. If the check box is not
selected, batch data management is activated; BATCH messages and tag archive data
will be collected.
Message language Select the message language in which the batch data management
(CDV) will collect the BATCH messages from a drop-down list box.
Click "Add…" to insert a WinCC station in the list.
First, enter the UNC path for your WinCC project file (*.mcp). For example:
Select the type of WinCC station involved.
If your WinCC server is intended as an alarm OS, activate the corresponding check box.
Enter the new server in the list with the "OK" button.
Add all WinCC PCs used in the same way.
You can use the "Properties…" button to check the individual entries and change them if
When all WinCC stations have been entered, you can close this task by clicking
The information in your project relating to the WinCC stations used has been entered in the
configuration file and you can continue with the next task.