Settings in Nero Home
6.2.5 Configuring a TV or recording card
Nero Home provides simultaneous support for a number of TV cards, TV cards with dual
tuner, and/or hybrid tuner cards.
You will find a list of supported TV cards on our Internet page under:
You will find a list of compatible devices on our Internet page under:
Nero Home will help you configure a TV or recording card by means of the TV wizard, which
will guide you through all the necessary steps. Proceed as follows:
In the Settings main menu click on the Photos, Music and Video button.
The TV and Radio screen is displayed.
Click on the Configure TV cards button.
The Configure TV Card screen appears and displays a list of available TV and/or re-
Double-click on the card you want to configure.
The relevant card screen appears.
If you have installed an analog TV card, choose between Antenna and Cable as the signal
If you have installed a DVB-C TV card, select the Cable TV provider.
If you have installed a recording card, select the Video Input.
Select the installed audio device in the Select audio device selection list.
Select the audio input you want to use in the Select audio input selection list.
If you have installed a DVB-S TV card, select Satellite Configuration.
Select the required quality for subsequent recordings in the Select recording profile
If you have installed a TV card:
1. Click on the Scan Channels button
The relevant screen is displayed and Nero Home automatically scans the TV and radio
tuners to record all available channels.
The following information areas are available:
Shows the scanning progress for each card on the basis of a
Indicates the signal quality of the antenna.
Indicates the signal strength of the antenna.
Indicates the number of TV channels found.
Indicates the number of radio channels found.