pdf viewer in asp.net using c# : How to copy pictures from pdf file control SDK platform web page winforms .net web browser serialflash2-part1100

Serial FLASH Programming User’s Guide
21     
Scripts for SPI Controllers  
©1989-2016 Lauterbach GmbH
Finding the <serialflash_code> of Your Serial Flash Device
The following step-by-step procedure helps you find the <serialflash_code> of your serial Flash device. 
Based on the <serialflash_code>, you can then identify the correct *.bin file. 
To find the <serialflash_code>:
1.
Run the following PRACTICE script file (*.cmm) from the TRACE32 demo folder: 
If this demo script is missing, you can download it from www.lauterbach.com/scripts.html.
The Find SPI flash code dialog opens.
2.
Under spi flash parameters, make your settings. 
- You can find the required information in the serial Flash documentation of the manufacturer.
- For an example of where to search for the information, see figure and table below:
CD.DO ~~\demo\etc\flash\find_spidef.cmm
;The path prefix ~~ expands to the system directory of TRACE32,
;by default C:\t32.
Description
One-Byte
Instruction
Code (BIN)
One-Byte
Instruction
Code (HEX)
Address
Bytes
Dummy
Clock
Cycle
Data
Bytes
Instruction
READ
Read Data Bytes
0000 0011
03h
0
1 to 
3/4
Read Flag Status Register
1 to 
0
0111 0000
70h
0
RFSR
PP
Page Program
0000 0010
02h
3/4
0
1 to 256
...
...
...
In the serial Flash documentation of 
the manufacturer, search for terms 
like:
- erase capability
- sector
- granularity
in order to find the correct value.
A
A
B
B
C
C
How to copy pictures from pdf file - copy, paste, cut PDF images in C#.net, ASP.NET, MVC, Ajax, WinForms, WPF
Detailed tutorial for copying, pasting, and cutting image in PDF page using C# class code
paste jpg into pdf; how to copy a pdf image into a word document
How to copy pictures from pdf file - VB.NET PDF copy, paste image library: copy, paste, cut PDF images in vb.net, ASP.NET, MVC, Ajax, WinForms, WPF
VB.NET Tutorial for How to Cut or Copy an Image from One Page and Paste to Another
how to cut an image out of a pdf; copy image from pdf to powerpoint
Serial FLASH Programming User’s Guide
22     
Scripts for SPI Controllers  
©1989-2016 Lauterbach GmbH
3.
Click Find. 
- The code box displays the <serialflash_code> of your serial Flash device.
- If the code box displays unknown, then proceed as described in “If There is No Script”.
4.
Make a note of the displayed <serialflash_code>.
5.
Click End to close the dialog.
6.
Identify the correct *.bin file based on the <serialflash_code>. The following example illustrates how to 
do this.
“Example for SPI Controllers”, page 23
- For information about the file name convention for driver binary files, see “File Name 
Convention for Serial Flash Drivers” on page9.
VB.NET PDF Convert to Word SDK: Convert PDF to Word library in vb.
application. In addition, texts, pictures and font formatting of source PDF file are accurately retained in converted Word document file.
copy pdf picture to word; how to copy pdf image to word
VB Imaging - VB Code 93 Generator Tutorial
for developers to create and write Code 93 linear barcode pictures on PDF documents, multi create a Windows application or ASP.NET web form and copy the VB
how to cut image from pdf; cut picture pdf
Serial FLASH Programming User’s Guide
23     
Scripts for SPI Controllers  
©1989-2016 Lauterbach GmbH
Example for SPI Controllers
Target: 
ARM-based STM32F10X CPU with the SPI controller stm 
Serial Flash device M25P64 
Taken together, the Code column and the Controller column make up the file name of the serial Flash driver 
binary file: spi64_stm.bin. The number 64 indicates the size of one sector in KByte (the sector erase 
size in KByte).
The binary file resides in this folder: ~~/demo/arm/flash/byte 
Note: ~~ is expanded to the <TRACE32_installation_directory>, which is c:/T32 by default.
This results in the following command line:
; Specify the serial Flash programming algorithm and where it runs in 
; the target RAM.
<code_range>
<data_range>
<file>
FLASHFILE.TARGET 0x20000000++0x1FFF 0x20002000++0x1FFF 
~~/demo/arm/flash/byte/spi64_stm.bin
C# Imaging - C# Code 93 Generator Tutorial
for developers to create and write Code 93 linear barcode pictures on PDF documents, multi create a Windows application or ASP.NET web form and copy the C#
copy image from pdf; copy and paste image into pdf
VB.NET Image: VB.NET Codes to Load Images from File / Stream in .
Now you can freely copy the VB.NET sample this VB.NET imaging library with pictures of your provide powerful & profession imaging controls, PDF document, image
paste image in pdf file; cut and paste image from pdf
Serial FLASH Programming User’s Guide
24     
Scripts for SPI Controllers  
©1989-2016 Lauterbach GmbH
FLASHFILE Declaration Examples
Declaration Example for STM32F103 (Cortex-M3)
STM32F103 (ARM Cortex-M3) from ST Microelectronics, M25P64 (64Mbit)
SPI Tx register/SPI Rx register: 0x4001300C
Sector size: 64Kbytes (0x0--0xFFFF)
Driver file: ~~/demo/arm/flash/byte_thumb/spi64_stm.bin
Note: ~~ is expanded to the <TRACE32_installation_directory>, which is c:/T32 by default.
; Reset the FLASHFILE declaration within TRACE32.
FLASHFILE.RESet
; For the serial Flash CS connected PIO A.4 (Group A, port Number4)
; PIO group A register 0x4001080C
<SPI Tx reg> <SPI Rx reg> <CS GPIO reg> <CS bit>
FLASHFILE.CONFIG 0x4001300C    0x4001300C    0x4001080C     0x4
; Specify the serial Flash programming algorithm and where it runs on
; the target RAM.
FLASHFILE.TARGET 0x20000000++0x1FFF 0x20002000++0x1FFF 
~~/demo/arm/flash/byte_thumb/spi64_stm.bin
C#: Use OCR SDK Library to Get Image and Document Text
image recognition for scanned documents and pictures in C#. You can directly copy demos to your .NET application Png, Bmp, ) and output to text or PDF file.
copy image from pdf to; how to copy an image from a pdf in preview
VB.NET Image: VB.NET Code to Create Watermark on Images in .NET
and whether to burn it to the pictures to make Please feel free to copy them to your program provide powerful & profession imaging controls, PDF document, tiff
paste picture into pdf preview; how to paste a picture into pdf
Serial FLASH Programming User’s Guide
25     
Scripts for SPI Controllers  
©1989-2016 Lauterbach GmbH
Declaration Example for AT91SAM9XE (ARM9)
AT91SAM9XE (ARM9) from ATMEL, M25P64 (64Mbit)
SPI Tx register/SPI Rx register: 0xFFFC800C / 0xFFFC8008
Sector size: 64Kbytes (0x0--0xFFFF) 
Driver file: ~~/demo/arm/flash/byte/spi64_at91sam9xe.bin 
Note: ~~ is expanded to the <TRACE32_installation_directory>, which is c:/T32 by default.
.
; Reset the FLASHFILE declaration within TRACE32.
FLASHFILE.RESet
; The AT91SAM9XE’s CS is controlled by the SPI register 0xFFFC8000 not
; the specified GPIO ports.
<SPI Tx reg> <SPI Rx reg> <SPI ChipEnable reg> 
FLASHFILE.CONFIG 0xFFFC800C    0xFFFC8008     0xFFFC8000 
; Specify the serial Flash programming algorithm and where it runs on
; the target RAM.
FLASHFILE.TARGET 0x300000++0x1FFF 0x302000++0x1FFF 
~~/demo/arm/flash/byte/spi64_at91sam9xe.bin
C# Imaging - C# MSI Plessey Barcode Tutorial
Create high-quality MSI Plessey bar code pictures for almost Copy C#.NET code below to print an MSI a document file, like Word, Excel, PowerPoint, PDF and TIFF
pdf cut and paste image; how to copy pdf image into word
C# Imaging - Scan RM4SCC Barcode in C#.NET
you can easily detect & decode RM4SCC barcode from scanned documents and pictures in your Steps to Read/Scan Data Matrix from Image/PDF/TIFF/Office File.
paste picture to pdf; copying image from pdf to word
Serial FLASH Programming User’s Guide
26     
Scripts for SPI Controllers  
©1989-2016 Lauterbach GmbH
Checking the Identification from the Serial Flash Device
The following command can be used to check if TRACE32 can access the serial Flash device:
FLASHFILE.GETID
Get the ID values of the serial Flash 
device.
; Open the TRACE32 AREA window.
AREA.view
; Check the access to the serial Flash device
; by getting the manufacturer ID and the device ID.
FLASHFILE.GETID
C# Imaging - Scan ISBN Barcode in C#.NET
which can be used to track images, pictures and documents BarcodeType.ISBN); // read barcode from PDF page Barcode from PowerPoint slide, you can copy demo code
copy image from pdf to ppt; how to copy picture from pdf
VB.NET TIFF: How to Draw Picture & Write Text on TIFF Document in
about the issue of how to draw pictures or write Copy the demo codes and run your project to provide powerful & profession imaging controls, PDF document, tiff
paste image into pdf in preview; copy images from pdf to powerpoint
Serial FLASH Programming User’s Guide
27     
Scripts for SPI Controllers  
©1989-2016 Lauterbach GmbH
Erasing the Serial Flash Device
The following command is available to erase serial Flash devices:
Example 1: Original erase range
Example 1 cont’d: Two smaller erase ranges
Example 2: Erase 8 MB in increments of 1 MB using a RePeaT loop
FLASHFILE.Erase <range> 
Erase the serial Flash.
NOTE:
The FLASHFILE.Erase command has a time limitation.
TRACE32 has to get a response (success or failure) from the serial Flash in 
3minutes.
If you get an error message because of the FLASHFILE.Erase time limita-
tion, then divide the original range into several smaller ranges. 
; Erase 2MB starting from 0x0.
FLASHFILE.Erase 0x0--0x1FFFFF 
; Erase 2MB starting from 0x0.
FLASHFILE.Erase 0x0--0xFFFFF 
FLASHFILE.Erase 0x100000--0x1FFFFF 
&addr=0x0
RePeaT 8.
FLASHFILE.Erase &addr++0xFFFFF
&addr=&addr+0x100000
)
Serial FLASH Programming User’s Guide
28     
Scripts for SPI Controllers  
©1989-2016 Lauterbach GmbH
Programming the Serial Flash Device
The following commands are available to program the serial Flash: 
The data from <file> is written to the address range specified by <range>. If no <range> or <address> is 
specified, programming starts at address 0x0.
Example 1
Example 2 
FLASHFILE.LOAD <file> [<address> | <range>]
Program serial Flash.
FLASHFILE.LOAD <file> [<address> | <range>] /ComPare
; Program the contents of my_file.bin to the serial Flash memory starting
; at address 0x0.
FLASHFILE.LOAD my_file.bin 0x0 
; Verify the contents of my_file.bin against the serial Flash memory
; starting at address 0x0.
FLASHFILE.LOAD my_file.bin 0x0 /ComPare
Serial FLASH Programming User’s Guide
29     
Scripts for SPI Controllers  
©1989-2016 Lauterbach GmbH
Copying the Serial Flash Memory
The following command is available to copy:
Any data from any CPU memory area to the serial Flash memory, or
Any data from one address range of the serial Flash to another address range within the same 
serial Flash memory; for example, for backup purposes.
Example 1 
Result (1)
Example 2
FLASHFILE.COPY <source range> <target addr> 
Copy data from the source range 
to the defined address of the 
serial Flash.
FLASHFILE.COPY <source range> <target addr> /ComPare
Verify the source range data 
against the target range data.
; Copy the 1MB virtual memory data at 0x0 to the serial Flash address 
; at 0x100000.
; VM: The virtual memory of the TRACE32 software.
FLASHFILE.COPY VM:0x0--0xFFFFF 0x100000
; Verify the data between virtual memory and serial Flash.
FLASHFILE.COPY VM:0x0--0xFFFFF 0x100000 /ComPare
Data is copied from the
CPU to the serial Flash    
Serial FLASH Programming User’s Guide
30     
Scripts for SPI Controllers  
©1989-2016 Lauterbach GmbH
Example 3
; Copy the 1MB serial Flash data at 0x0 to the serial Flash 
; at 0x800000.
FLASHFILE.COPY 0x0--0xFFFFF 0x800000
; Verify the 1MB serial Flash data between 0x0 and 0x800000.
FLASHFILE.COPY 0x0--0xFFFFF 0x800000 /ComPare
Documents you may be interested
Documents you may be interested