38
“View mode” in 3D EFIS module
In «
Edit
» mode, you can manually move
along the 3D terrain by controlling pitch,
heading, altitude and moving back and
forth.
When you have a route created and still in
«Edit» mode, if you press over a waypoint
from the «Route» module, you will be
positioned 2 NM from the selected
waypoint in direction of the leg.
Use the following controls to move along
the terrain:
➡
use the Altitude indicator to move
up/down.
➡ use the arrows on the left to move forth and back.
➡
use the artificial horizon in the middle of the screen to control pitch and direction.
Terrain awareness 2D / 3D
When the option is enabled under «Map
Options», you will show terrain zones
above current altitude in RED. Terrain
below us up to 50 meters will show in
YELLOW.
This feature works for both the EFIS module
and the 2D moving map.
You must acquire the 3D data
from the Map Store if you wish to
use this feature.
Note: if you have the option “Terrain
awareness 2D/3D” enabled, but you don`t
use it, you might experience a yellow
color on the map, so it is better that you
disable the option.
Go back to index
52