49
Dainippon Screen Mfg. Co., Ltd.
Running PDF/X
Creating PDF/X-1a Files in InDesign CS
59
II. Compression
Compression
Make the setting as necessary.
III. Marks and Bleeds
Marks
Make the setting as necessary.
Bleed and Slug
Make the setting as necessary.
Bleed
Same value as Trueflow
IV. Advanced
PDF/X
[for US] U.S. Web Coated (SWOP) v2 (Custom)
[for EU] Euroscale Coated v2 (Custom)
Transparency Flattener
Preset
[High Resolution] Trueflow
V. Security
If security settings are made, there will be times when Trueflow ends in an error, resulting in
improper output. Do not make any security settings.
3. Click the "Export" button to save the file.
Compression setting
The lossless compression setting is used
because the emphasis is on quality in the
Presets files.
When performing JPEG compression,
make sure that there is no problem with
quality before changing the setting.
[PDF/X]:
We recommend "U.S. Web Coated
(SWOP) v2" for the US version and
"Euroscale Coated v2" for the European
version, but other settings are also
acceptable. Change as necessary.
[ Transparency Flattener ]:
Output with "High Resolution" selected
normally.
If an error occurs when RIP'ing very
complex data, including data with
transparency processing, review the
information in "More information about
the Transparency Flattener Options"
(P13) and then change the settings using
Edit > Transparency Flattener Presets.
(Do not make any settings.)
Preview edit pdf metadata - add, remove, update PDF metadata in C#.net, ASP.NET, MVC, Ajax, WinForms, WPFAllow C# Developers to Read, Add, Edit, Update and Delete PDF Metadata
read pdf metadata java; c# read pdf metadata Preview edit pdf metadata - VB.NET PDF metadata library: add, remove, update PDF metadata in vb.net, ASP.NET, MVC, Ajax, WinForms, WPFEnable VB.NET Users to Read, Write, Edit, Delete and Update PDF Document Metadata
batch update pdf metadata; read pdf metadata
34
Dainippon Screen Mfg. Co., Ltd.
Trueflow DTP Output Guideline The 14th Edition
Creating PDF1.3 Files in Illustrator CS
60
Creating PDF1.3 Files in Illustrator CS
It is not possible to create PDF/X-1a directly in Illustrator CS.
However, it is possible to create PDF with the same quality as PDF/X-1a from any PDF 1.3 data
saved in Illustrator CS except PDF 1.3 that does not include OutputIntent information.
This section describes how to create PDF 1.3 that is reliable for printing.
Saving as PDF 1.3 format
1. Select "File / Save As... "
2. Make the following settings and click the "Save" button in the Save As dialog box.
Save As
Specify a file name.
Where
Specify a save location for the file.
Format
Adobe PDF (pdf)
Paper size issue for PDF1.3 made by
IllustratorCS
If PDF1.3 is made by IllustratorCS, the
paper size is decided to include in all
of objects (including invisible objects)
which are placed out of bleed area. It is,
therefore, if there are objects which are
placed out of bleed area, PDF's paper
size (MediaBox) will be larger than
IllustratorCS's document size. If using
Trueflow to process PDF1.3 made by
IllustratorCS, you must set "TrimBox" for
PDF Origin in the import setup.
Embedding of images
Embed the images rather than linking
them. (P95)
37
Dainippon Screen Mfg. Co., Ltd.
Running PDF/X
Creating PDF1.3 Files in Illustrator CS
61
Adobe PDF Preset Options
I. General
Compatibility
Acrobat 4 (PDF 1.3)
Preserve Illustrator Editing Capabilities
Either On or Off
II. Advanced
Overprint and Transparency Flattener Options (PDF 1.3 Only)
Overprints
Preserve
Preset
[ High Resolution ]
3. Click Save PDF.
Warning upon saving
If you save with the Preserve Illustrator
Editing Capabilities option Off, the
following dialog box is displayed. Click
Yes to save the data.
This message warns that you will not be
able to edit areas where transparency has
been applied because the transparency is
flattened when the file is saved.
[ Preset ]
Output with "High Resolution" selected
normally.
If errors occur while RIP'ing extremely
complex data, including processing
transparency effects, refer to "More
information about the Transparency
Flattener Options" (P13), and then
change the setting using Edit > Transparency
Flattener Presets, or change the setting by
clicking the "Custom..." button.
How to C#: Preview Document Content Using XDoc.Word How to C#: Preview Document Content Using XDoc.Word. Get Preview From File. You may get document preview image from an existing Word file in C#.net.
pdf metadata viewer; add metadata to pdf programmatically
17
Dainippon Screen Mfg. Co., Ltd.
Trueflow DTP Output Guideline The 14th Edition
Creating PDF/X-1a Files in QuarkXPress 7.0 / 8.0
62
Creating PDF/X-1a Files in QuarkXPress 7.0 / 8.0
In QuarkXPress 7.0 / 8.0, you can create PDF/X-1a that has passed Preflight directly from an
application using the steps below.
Saving as PDF/X-1a format
1. Select " File / Export / Layout as PDF... "
2. The Export as PDF dialog box is displayed.
Specify the save location, select "TrueflowPDF-X-1a Style 3.0US" in PDF Style:, and then
click the Save button to save it.
There are times when you may get
unexpected results if you change any of
the other settings.
Do not change any of the other settings
with following procedure.
13
Dainippon Screen Mfg. Co., Ltd.
Running PDF/X
Creating PDF/X-1a Files in QuarkXPress 7.0 / 8.0
63
Output Style settings
I. Pages
Spreads
Either On or Off
II. Compression
Compression
Make the setting as necessary.
Resolution
Make the setting as necessary.
26
Dainippon Screen Mfg. Co., Ltd.
Trueflow DTP Output Guideline The 14th Edition
Creating PDF/X-1a Files in QuarkXPress 7.0 / 8.0
64
III. Color
Color Options
Mode
Composite
Setup
[for US] Trueflow PDF Color 1.0US
[for EU] Trueflow PDF Color 1.0EU
IV. Bleed
Bleed Options
Bleed Type
Symmetric
Amount
Same value as Trueflow
[ Setup ] :
Use the special Color Setup file provided
with Trueflow. See "Color Setup" (P109)
for more information about the Color
Setup file.
Color separation and section settings
If you specify color separation, do not
specify anything other than numbers for
the "Page Numbering Options" section.
22
Dainippon Screen Mfg. Co., Ltd.
Running PDF/X
Creating PDF/X-1a Files in QuarkXPress 7.0 / 8.0
65
V. Transparency
Transparency Options
Vector Images
400 dpi
Blends
400 dpi
Drop Shadows
400 dpi
Transparent Objects In Imported
PDF & AI Files
Flattening Resolution
Custom resolution
VI. OPI
(PDF/X-1a is a standard that prohibits OPI. Please do not select OPI.)
[Flattening Resolution]
Change the setting as appropriate
according to the content of the imported
data. Custom resolution
24
Dainippon Screen Mfg. Co., Ltd.
Trueflow DTP Output Guideline The 14th Edition
Creating PDF/X-1a Files in Acrobat Distiller
66
Creating PDF/X-1a Files in Acrobat Distiller
When you use an application that cannot create a PDF/X-1a file directly, create a PDF/X-1a file
from the PostScript file that was output from the application using Acrobat Distiller 9.
In these applications, a PPD file called "Adobe PDF" is used as the PPD file when outputting a PostScript
file rather than a Trueflow PPD file. (The same steps are used in Acrobat Distiller 7 / 8 as well.)
It is necessary to export PostScript in which transparency cannot be encoded, so at that point, you
must make the appropriate transparency flattening settings, and RGB images also cannot be included.
Creating in Acrobat Distiller 9
1. Open Acrobat Distiller 9, select "Trueflow PDFX1a 1.3" and drag the PostScript file into the
dialog box to create a PDF file.
Adobe PDF Settings
Default Settings
[for US] Trueflow PDFX1a 1.3US
[for EU] Trueflow PDFX1a 1.3EU
For procedure to install presets, refer to
"Presets for Adobe CS2 - CS5, Acrobat 7 -
9" (P99).
When you do this, select either the US or
the EU preset (US screens are used in this
explanation).
31
Dainippon Screen Mfg. Co., Ltd.
Running PDF/X
Verification and confirmation of PDF
67
Verification and confirmation of PDF
Verifying PDF
After PDF creation has been completed, perform verification.
This section describes the steps for verifying using Acrobat 9 Professional.
(The same steps are used in Acrobat Distiller 7 / 8 Professional as well.)
I. Using Acrobat 9 Professional
1. Open the file you wish to verify using Acrobat 9 Professional, and select "Document / Preflight...".
II. Preflight
2. Select the appropriate profile from the Preflight list, and click "Execute" to run the Preflight
check.
(PDF/X-1a is used in this explanation).
If you use Adobe Creative Suite 3, you
must update Acrobat 8 to 8.1.
PDF/X-4 Output
(Acrobat 7)
See "Preflight profiles for an RGB workflow"
(P106), and then load the "Trueflow RGBwf
1.1US.kfp", "Trueflow RGBwf 1.1EU.kfp" RGB
workflow profile provided in Trueflow and
verify.
(Acrobat 8)
Use the "Verify compliance with PDF/X-4
(Draft)" PDF/X-4 profile
and verify.
(Acrobat 9)
Use the "Verify compliance with PDF/X-4"
and verify.
15
Dainippon Screen Mfg. Co., Ltd.
Trueflow DTP Output Guideline The 14th Edition
Verification and confirmation of PDF
68
3. After the completion, the preflight results will be displayed.
[OK (acceptable)]
[NG (unacceptable)]
III. Preflight: results in detail
4. Information such as "Overview" and "Preflight information" is displayed when you check the
"Show detailed information about document" checkbox.
This completes the PDF/X-1a verification.
You can view more information on
the verification results by selecting an
item from the "Overview" and "Preflight
information" pulldown menus.
Documents you may be interested
Documents you may be interested
